topola/INSTALL.md

Installing Topola

Building and installing Topola from source

Prerequisites

Building Topola from source requires Git and Cargo to be installed on your system. Follow the instructions in the above links to obtain these.

Obtaining the source

Clone the repository:

git clone https://codeberg.org/topola/topola.git

Preparing to build

Change your working directory to your clone of Topola's repository:

cd topola

Command-line application

Topola has a command-line application written with the help of the clap library.

Installation from source

(Topola can be also built and run without installation. If you do not want to install new software on your system, skip now to the Debug build subsection.)

Run the following command to build and install the Topola's command-line application:

cargo install --locked --path crates/topola-cli

You can then invoke the application from your terminal as topola.

Debug build

If you do not want to install new software on your system, or are interested in debugging or developing Topola, you can build a debug executable of the Topola's command-line application inside your working directory by running

cargo build -p topola-cli

Once built, you can invoke the debug executable by replacing the topola command with cargo run -p topola-cli -- .

Autorouting example

As an example, running the following commands will autoroute a KiCad project of a simple THT diode bridge rectifier:

cd tests/single_layer/tht_diode_bridge_rectifier/
topola tht_diode_bridge_rectifier.dsn

(Obviously, to use the debug executable, replace the second command with cargo run -p topola-cli -- tht_diode_bridge_rectifier.dsn.)

By default, the output filename is the input filename with extension changed to ses: tht_diode_bridge_rectifier.ses.

Viewing the results

You can view the results of the autorouting in KiCad if you have it installed. First, open the layout in the KiCad PCB Editor:

pcbnew tht_diode_bridge_rectifier.kicad_pcb

Then choose File > Import > Specctra Session... from the menu bar. In the newly opened file dialog, choose the file named tht_diode_bridge_rectifier.ses. This will load the autorouted traces.

Egui graphical user interface application

Topola has a graphical user interface (GUI) application written using the egui library and its paired eframe framework. For displaying dialog boxes, Topola's GUI application uses the Rusty File Dialogs library.

Due to technical constraints, these libraries have multiple runtime dependencies that are not managed by Cargo, and as such, it is impossible to determine whether these dependencies have been satisfied during compilation, but only once the application has been launched. Because of that, Topola may crash on startup, or have the file selection dialog not appear. If you encounter any problems, read the Troubleshooting unmanaged runtime dependencies subsection.

Native installation from source

(Topola can be also built and run without installation. If you do not want to install new software on your system, skip now to the Native debug build subsection.)

The following command will build and install the Topola's GUI application:

cargo install --locked --path crates/topola-egui

You can then launch the application from your terminal by running

topola-egui

Native debug build

If you do not want to install new software on your system, or are interested in debugging or developing Topola, you can build a debug executable of the Topola's GUI application inside your working directory by running

cargo build -p topola-egui

Once built, you can launch the application from the debug executable with the following command:

cargo run -p topola-egui

Running Topola in Web browser

Topola's GUI application can be built to run in a Web browser using Trunk. If you have cargo-binstall on your system, you can install Trunk from binary with

cargo binstall trunk

Alternatively, you can build Trunk from source by running

cargo install trunk

To build and open the Topola's GUI application in your browser, run

trunk serve

Troubleshooting unmanaged runtime dependencies

Crash on startup

If the Topola's GUI application crashes on startup (no window is shown), necessary libraries for graphics and windowing (such as X11 and Wayland) may be missing. Note that running ldd on the topola-egui executable does not show these, as they are loaded dynamically (via some dlopen-like mechanism) on startup.

No file selection dialog appears

If no file selection dialog appears when trying to open a file, then this is most likely because you do not have Zenity installed on your system. In this case, an error similar to the following should be emitted in your terminal:

[2025-01-01T01:16:17Z ERROR rfd::backend::xdg_desktop_portal] pick_file error No such file or directory (os error 2)

Zenity is needed because it is used by the default xdg-portal backend of Rusty File Dialogs. As an alternative, you can try its other backend, gtk3, by building topola-egui with the following command:

cargo build -p topola-egui --release --no-default-features --features disable_contracts --features gtk3

Automated tests

Topola has automated tests to make sure its basic functionalities work. To execute these, run

cargo test

Contracts

(The feature described in this section is currently used only for debugging and is enabled only when using nightly Rust. If you are not interested in debugging, you can skip this section altogether.)

When trying to locate the source of a bug, it may be helpful to enable contracts (yes, this Wikipedia article needs improvement), which are nothing else but somewhat enchanced assertions.

Unfortunately, the contracts library which we have been using enforces post-conditions via closures, which have deal-breaking limitations. To bypass these we have forked and modified it to use try blocks instead. The fork is vendored in the vendored/contracts/ directory.

However, try blocks are not present in stable Rust yet, so to use these you need to set up your toolchain to use a nightly version of Rust.

Nightly Rust

To use nightly Rust, run the following command:

rustup override set nightly

You can go back to stable with

rustup override unset

Enabling contracts

To enable contracts, simply add a --no-default-features switch. This switches off a default feature that prevents contracts from executing. For example, to build tests with contracts, simply run

cargo test --no-default-features

Of course, you can enable contracts for any build target. For instance, the following command will build the Topola's GUI application with debug profile and contracts enabled:

cargo build -p topola-egui --no-default-features