test: Add automatic test routine for tht_db25_to_tht_db25 test

This provides a speedup, but may break squeezing through under bends in
some corner cases.

src/autorouter/planar_reconfigurer.rs

@@ -2,10 +2,7 @@
 //
 // SPDX-License-Identifier: MIT
 
-use std::iter::Skip;
-
 use enum_dispatch::enum_dispatch;
-use itertools::{Itertools, Permutations};
 use specctra_core::mesadata::AccessMesadata;
 
 use crate::autorouter::{

src/drawing/query.rs

@@ -10,6 +10,7 @@ use crate::{
     drawing::{
         graph::{GetMaybeNet, MakePrimitiveRef},
         primitive::MakePrimitiveShape,
+        seg::SeqLooseSegIndex,
         Collision, Infringement,
     },
     geometry::{
@@ -105,17 +106,24 @@ impl<CW: Clone, Cel: Copy, R: AccessRules> Drawing<CW, Cel, R> {
         v.push(joints.0.into());
         v.push(joints.1.into());
 
-        if let Some(seg0) = self.primitive(joints.0).seg() {
+        v.extend(
-            v.push(seg0.into());
+            self.collect_bend_bow_segs(bend)
-        }
+                .map(Into::<PrimitiveIndex>::into),
-
+        );
-        if let Some(seg1) = self.primitive(joints.1).seg() {
-            v.push(seg1.into());
-        }
-
         v
     }
 
+    pub fn collect_bend_bow_segs(
+        &self,
+        bend: LooseBendIndex,
+    ) -> impl Iterator<Item = SeqLooseSegIndex> {
+        let joints = self.primitive(bend).joints();
+        self.primitive(joints.0)
+            .seg()
+            .into_iter()
+            .chain(self.primitive(joints.1).seg().into_iter())
+    }
+
     pub fn cut(
         &self,
         line: Line,

src/router/navmesh.rs

@@ -249,6 +249,7 @@ impl Navmesh {
 
         for prenavedge in prenavmesh.triangulation().edge_references() {
             Self::add_prenavedge_to_repr_as_quadrinavedges(
+                layout,
                 &mut graph,
                 &prenavnode_to_navnodes,
                 &overlapping_prenavnodes_unions,
@@ -266,6 +267,7 @@ impl Navmesh {
         // quadrinavedges exist for every one of them.
         for constraint in prenavmesh.constraints() {
             Self::add_prenavedge_to_repr_as_quadrinavedges(
+                layout,
                 &mut graph,
                 &prenavnode_to_navnodes,
                 &overlapping_prenavnodes_unions,
@@ -364,26 +366,27 @@ impl Navmesh {
             PrenavmeshNodeIndex,
             Vec<(NodeIndex<usize>, NodeIndex<usize>)>,
         >,
-        trianvertex: PrenavmeshNodeIndex,
+        prenavnode: PrenavmeshNodeIndex,
-        node: BinavnodeNodeIndex,
+        binavnode: BinavnodeNodeIndex,
     ) {
         let navnode1 = graph.add_node(NavnodeWeight {
-            binavnode: node,
+            binavnode,
             maybe_sense: Some(RotationSense::Counterclockwise),
         });
 
         let navnode2 = graph.add_node(NavnodeWeight {
-            binavnode: node,
+            binavnode,
             maybe_sense: Some(RotationSense::Clockwise),
         });
 
         prenavnode_to_navnodes
-            .get_mut(&trianvertex)
+            .get_mut(&prenavnode)
             .unwrap()
             .push((navnode1, navnode2));
     }
 
     fn add_prenavedge_to_repr_as_quadrinavedges(
+        layout: &Layout<impl AccessRules>,
         graph: &mut UnGraph<NavnodeWeight, (), usize>,
         prenavnode_to_navnodes: &BTreeMap<
             PrenavmeshNodeIndex,
@@ -403,6 +406,7 @@ impl Navmesh {
         ));
 
         Self::add_prenavedge_as_quadrinavedges(
+            layout,
             graph,
             prenavnode_to_navnodes,
             from_prenavnode_repr,
@@ -411,6 +415,7 @@ impl Navmesh {
     }
 
     fn add_prenavedge_as_quadrinavedges(
+        layout: &Layout<impl AccessRules>,
         graph: &mut UnGraph<NavnodeWeight, (), usize>,
         prenavnode_to_navnodes: &BTreeMap<
             PrenavmeshNodeIndex,
@@ -419,16 +424,83 @@ impl Navmesh {
         from_prenavnode: PrenavmeshNodeIndex,
         to_prenavnode: PrenavmeshNodeIndex,
     ) {
-        for (from_navnode1, from_navnode2) in prenavnode_to_navnodes[&from_prenavnode].iter() {
+        let mut maybe_lowest_join: Option<(usize, usize)> = None;
-            for (to_navnode1, to_navnode2) in prenavnode_to_navnodes[&to_prenavnode].iter() {
+
+        for (from_index, (from_navnode1, from_navnode2)) in prenavnode_to_navnodes[&from_prenavnode]
+            .iter()
+            .rev()
+            .enumerate()
+        {
+            let from_binavnode = graph.node_weight(*from_navnode1).unwrap().binavnode;
+
+            // If binavnodes are found to be joined, only add a single binavedge
+            // between them.
+            if let Some((to_index, (to_navnode1, to_navnode2))) = prenavnode_to_navnodes
+                [&to_prenavnode]
+                .iter()
+                .rev()
+                .enumerate()
+                .find(|(_, (to_navnode1, _))| {
+                    let to_binavnode = graph.node_weight(*to_navnode1).unwrap().binavnode;
+
+                    Self::are_binavnodes_joined(layout, from_binavnode, to_binavnode)
+                })
+            {
+                // Add binavedge.
                 graph.update_edge(*from_navnode1, *to_navnode1, ());
+                graph.update_edge(*from_navnode2, *to_navnode2, ());
+
+                maybe_lowest_join = Some((from_index, to_index));
+                continue;
+            }
+
+            for (to_index, (to_navnode1, to_navnode2)) in prenavnode_to_navnodes[&to_prenavnode]
+                .iter()
+                .rev()
+                .enumerate()
+            {
+                // Don't create navedges that would cross through and thus
+                // infringe joins of navnodes outwards of them.
+                if maybe_lowest_join.is_some_and(|lowest_join| {
+                    from_index >= lowest_join.0 || to_index >= lowest_join.1
+                }) {
+                    continue;
+                }
+
+                // Add binavedge.
+                graph.update_edge(*from_navnode1, *to_navnode1, ());
+                graph.update_edge(*from_navnode2, *to_navnode2, ());
+
+                // Add two more navedges to upgrade the binavedge to form a
+                // quadrinavedge.
                 graph.update_edge(*from_navnode1, *to_navnode2, ());
                 graph.update_edge(*from_navnode2, *to_navnode1, ());
-                graph.update_edge(*from_navnode2, *to_navnode2, ());
             }
         }
     }
 
+    fn are_binavnodes_joined(
+        layout: &Layout<impl AccessRules>,
+        from_binavnode: BinavnodeNodeIndex,
+        to_binavnode: BinavnodeNodeIndex,
+    ) -> bool {
+        let BinavnodeNodeIndex::LooseBend(from_bend) = from_binavnode else {
+            return false;
+        };
+
+        let BinavnodeNodeIndex::LooseBend(to_bend) = to_binavnode else {
+            return false;
+        };
+
+        let from_bend_bow_segs: Vec<_> =
+            layout.drawing().collect_bend_bow_segs(from_bend).collect();
+        let to_bend_bow_segs: Vec<_> = layout.drawing().collect_bend_bow_segs(to_bend).collect();
+
+        from_bend_bow_segs
+            .iter()
+            .any(|seg| to_bend_bow_segs.contains(seg))
+    }
+
     /// Returns the origin node.
     pub fn origin(&self) -> FixedDotIndex {
         self.origin

src/router/ng/router.rs

@@ -16,7 +16,7 @@ use crate::{
     geometry::primitive::PrimitiveShape,
     graph::GenericIndex,
     layout::{poly::PolyWeight, Layout},
-    stepper::{Abort, EstimateProgress},
+    stepper::Abort,
 };
 
 use super::{

src/triangulation.rs

@@ -77,6 +77,13 @@ impl<
             > 0)
     }
 
+    pub fn exists_constraint(&self, from: I, to: I) -> bool {
+        self.cdt.exists_constraint(
+            self.trianvertex_to_handle[from].unwrap(),
+            self.trianvertex_to_handle[to].unwrap(),
+        )
+    }
+
     pub fn intersects_constraint(&self, from: &VW, to: &VW) -> bool {
         self.cdt
             .intersects_constraint(from.position(), to.position())

tests/unilayer.rs

@@ -22,6 +22,42 @@ mod common;
 #[case::with_undo_redo_replay("with_undo_redo_replay")]
 fn test_master(#[case] variant: &str) {}
 
+#[apply(test_master)]
+fn autoroute_0603_breakout(variant: &str) {
+    let mut autorouter = common::load_design("tests/unilayer/0603_breakout/0603_breakout.dsn");
+    common::assert_layer_0_navnode_count(&mut autorouter, "R1-2", "J1-2", 22);
+    let mut invoker = common::create_invoker_and_assert(autorouter);
+    common::replay_and_assert_and_report(
+        &mut invoker,
+        "tests/unilayer/0603_breakout/autoroute_all.cmd",
+        variant,
+    );
+
+    let (mut autorouter, ..) = invoker.dissolve();
+
+    common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
+    //common::assert_number_of_conncomps(&mut autorouter, 2);
+}
+
+#[apply(test_master)]
+fn autoroute_4x_3rd_order_smd_lc_filters(variant: &str) {
+    let mut autorouter = common::load_design(
+        "tests/unilayer/4x_3rd_order_smd_lc_filters/4x_3rd_order_smd_lc_filters.dsn",
+    );
+    common::assert_layer_0_navnode_count(&mut autorouter, "J1-1", "L1-1", 558);
+    let mut invoker = common::create_invoker_and_assert(autorouter);
+    common::replay_and_assert_and_report(
+        &mut invoker,
+        "tests/unilayer/4x_3rd_order_smd_lc_filters/autoroute_signals.cmd",
+        variant,
+    );
+
+    let (mut autorouter, ..) = invoker.dissolve();
+
+    common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
+    //common::assert_number_of_conncomps(&mut autorouter, 16);
+}
+
 #[apply(test_master)]
 fn autoroute_4x4_1206_led_matrix_breakout(variant: &str) {
     let autorouter = common::load_design(
@@ -54,6 +90,42 @@ fn autoroute_4x4_1206_led_matrix_breakout_in_predefined_order(variant: &str) {
     common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
 }
 
+#[apply(test_master)]
+fn autoroute_smd_non_rectangular_buck_converter(variant: &str) {
+    let path =
+        "tests/unilayer/smd_non_rectangular_buck_converter/smd_non_rectangular_buck_converter.dsn";
+    let autorouter = common::load_design(&path);
+
+    let mut invoker = common::create_invoker_and_assert(autorouter);
+
+    common::replay_and_assert_and_report(
+        &mut invoker,
+        "tests/unilayer/smd_non_rectangular_buck_converter/route_all.cmd",
+        variant,
+    );
+
+    let (mut autorouter, ..) = invoker.dissolve();
+
+    common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
+    //common::assert_number_of_conncomps(&mut autorouter, 16);
+}
+
+#[apply(test_master)]
+fn autoroute_tht_db25_to_tht_db25(variant: &str) {
+    let autorouter =
+        common::load_design("tests/unilayer/tht_db25_to_tht_db25/tht_db25_to_tht_db25.dsn");
+    let mut invoker = common::create_invoker_and_assert(autorouter);
+    common::undo_all_and_assert(&mut invoker);
+    common::replay_and_assert_and_report(
+        &mut invoker,
+        "tests/unilayer/tht_db25_to_tht_db25/autoroute_all.cmd",
+        variant,
+    );
+
+    let (mut autorouter, ..) = invoker.dissolve();
+    common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
+}
+
 #[apply(test_master)]
 fn autoroute_tht_de9_to_tht_de9(variant: &str) {
     let autorouter =
@@ -85,23 +157,6 @@ fn autoroute_tht_de9_to_tht_de9_in_predefined_order(variant: &str) {
     common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
 }
 
-#[apply(test_master)]
-fn autoroute_0603_breakout(variant: &str) {
-    let mut autorouter = common::load_design("tests/unilayer/0603_breakout/0603_breakout.dsn");
-    common::assert_layer_0_navnode_count(&mut autorouter, "R1-2", "J1-2", 22);
-    let mut invoker = common::create_invoker_and_assert(autorouter);
-    common::replay_and_assert_and_report(
-        &mut invoker,
-        "tests/unilayer/0603_breakout/autoroute_all.cmd",
-        variant,
-    );
-
-    let (mut autorouter, ..) = invoker.dissolve();
-
-    common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
-    //common::assert_number_of_conncomps(&mut autorouter, 2);
-}
-
 #[apply(test_master)]
 fn autoroute_tht_diode_bridge_rectifier(variant: &str) {
     let mut autorouter = common::load_design(
@@ -140,47 +195,23 @@ fn autoroute_tht_diode_bridge_rectifier(variant: &str) {
 }
 
 #[apply(test_master)]
-fn autoroute_4x_3rd_order_smd_lc_filters(variant: &str) {
+fn autoroute_triangle_problem(variant: &str) {
-    let mut autorouter = common::load_design(
+    let path = "tests/unilayer/triangle_problem/triangle_problem.dsn";
-        "tests/unilayer/4x_3rd_order_smd_lc_filters/4x_3rd_order_smd_lc_filters.dsn",
+    let autorouter = common::load_design(&path);
-    );
+
-    common::assert_layer_0_navnode_count(&mut autorouter, "J1-1", "L1-1", 558);
     let mut invoker = common::create_invoker_and_assert(autorouter);
+
     common::replay_and_assert_and_report(
         &mut invoker,
-        "tests/unilayer/4x_3rd_order_smd_lc_filters/autoroute_signals.cmd",
+        "tests/unilayer/triangle_problem/route_all.cmd",
         variant,
     );
 
     let (mut autorouter, ..) = invoker.dissolve();
 
     common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
-    //common::assert_number_of_conncomps(&mut autorouter, 16);
 }
 
-// FIXME: This test fails indeterministically.
-// NOTE: Disabled until determinism is fixed.
-//#[test]
-/*#[allow(unused)]
-#[case("")]
-#[case("with_undo_redo_replay")]
-fn test_tht_3pin_xlr_to_tht_3pin_xlr(#[case] variant: &str) {
-    let mut autorouter = common::load_design(
-        "tests/unilayer/tht_3pin_xlr_to_tht_3pin_xlr/tht_3pin_xlr_to_tht_3pin_xlr.dsn",
-    );
-    //common::assert_navnode_count(&mut autorouter, "R1-2", "J1-2", ?);
-    let mut invoker = common::create_invoker_and_assert(autorouter);
-    common::replay_and_assert_and_report(
-        &mut invoker,
-        "tests/unilayer/tht_3pin_xlr_to_tht_3pin_xlr/autoroute_all.cmd",
-        "undo_redo_replay",
-    );
-
-    let (mut autorouter, ..) = invoker.dissolve();
-
-    common::assert_that_all_unilayer_groundless_ratlines_are_autorouted(&mut autorouter, "F.Cu");
-}*/
-
 #[apply(test_master)]
 fn autoroute_vga_dac_breakout(variant: &str) {
     let mut autorouter =
@@ -197,41 +228,3 @@ fn autoroute_vga_dac_breakout(variant: &str) {
 
     common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
 }
-
-#[apply(test_master)]
-fn autoroute_smd_non_rectangular_buck_converter(variant: &str) {
-    let path =
-        "tests/unilayer/smd_non_rectangular_buck_converter/smd_non_rectangular_buck_converter.dsn";
-    let autorouter = common::load_design(&path);
-
-    let mut invoker = common::create_invoker_and_assert(autorouter);
-
-    common::replay_and_assert_and_report(
-        &mut invoker,
-        "tests/unilayer/smd_non_rectangular_buck_converter/route_all.cmd",
-        variant,
-    );
-
-    let (mut autorouter, ..) = invoker.dissolve();
-
-    common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
-    //common::assert_number_of_conncomps(&mut autorouter, 16);
-}
-
-#[apply(test_master)]
-fn autoroute_triangle_problem(variant: &str) {
-    let path = "tests/unilayer/triangle_problem/triangle_problem.dsn";
-    let autorouter = common::load_design(&path);
-
-    let mut invoker = common::create_invoker_and_assert(autorouter);
-
-    common::replay_and_assert_and_report(
-        &mut invoker,
-        "tests/unilayer/triangle_problem/route_all.cmd",
-        variant,
-    );
-
-    let (mut autorouter, ..) = invoker.dissolve();
-
-    common::assert_that_all_ratlines_besides_gnd_are_autorouted(&mut autorouter);
-}

tests/unilayer/tht_db25_to_tht_db25/autoroute_all.cmd

@@ -0,0 +1,425 @@
+{
+  "done": [
+    {
+      "Autoroute": [
+        [
+          {
+            "pin": "J1-1",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-1",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-10",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-10",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-11",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-11",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-12",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-12",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-13",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-13",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-14",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-14",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-15",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-15",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-16",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-16",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-17",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-17",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-18",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-18",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-19",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-19",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-2",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-2",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-20",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-20",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-21",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-21",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-22",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-22",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-23",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-23",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-24",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-24",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-25",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-25",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-3",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-3",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-4",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-4",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-5",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-5",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-6",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-6",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-7",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-7",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-8",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-8",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J1-9",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J1-9",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-1",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-1",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-10",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-10",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-11",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-11",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-12",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-12",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-13",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-13",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-14",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-14",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-15",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-15",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-16",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-16",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-17",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-17",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-18",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-18",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-19",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-19",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-2",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-2",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-20",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-20",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-21",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-21",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-22",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-22",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-23",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-23",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-24",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-24",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-25",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-25",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-3",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-3",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-4",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-4",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-5",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-5",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-6",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-6",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-7",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-7",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-8",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-8",
+            "layer": "F.Cu"
+          },
+          {
+            "pin": "J2-9",
+            "layer": "B.Cu"
+          },
+          {
+            "pin": "J2-9",
+            "layer": "F.Cu"
+          }
+        ],
+        {
+          "principal_layer": 0,
+          "presort_by": "RatlineIntersectionCountAndLength",
+          "permutate": true,
+          "router": {
+            "routed_band_width": 100.0,
+            "wrap_around_bands": true,
+            "squeeze_through_under_bends": true
+          },
+          "timeout": {
+            "initial": 1.0,
+            "progress_bonus": 0.005
+          }
+        }
+      ]
+    }
+  ],
+  "undone": []
+}