fix(firmware): refresh release_bins to v0.6.5 — fixes node_id=1 on all nodes (#679)
release_bins/ was built from v0.4.3.1 and predated the early-capture
node_id fix (PRs #232/#375/#385/#390). Every device flashed from those
binaries emitted node_id=1 regardless of provisioned ID, making
multi-node deployments appear as a single node.
Changes:
- Rebuild all 6 release_bins/ binaries from v0.6.5 source (2026-05-20)
- esp32-csi-node.bin (8 MB, 1,110,384 bytes)
- esp32-csi-node-4mb.bin (4 MB, 894,352 bytes)
- bootloader.bin, partition-table.bin, partition-table-4mb.bin, ota_data_initial.bin
- Add release_bins/version.txt (0.6.5 / git-sha: d72e06fc8)
- README: add Step 0 "Pre-built binaries" flash command with version reference;
update expected boot output to show early-capture log line
- provision.py: fix write-flash → write_flash (esptool v4.10+ underscore API)
Validated on real hardware (COM7 — ESP32-S3 N16R8, node_id=2):
I (396) csi_collector: Early capture node_id=2 (before WiFi init, #232/#390)
I (406) main: ESP32-S3 CSI Node (ADR-018) — v0.6.5 — Node ID: 2
Closes #679
aeb69315d8