4e6ef76294
Extends R6.2.3 chest-centric placement to union of chest envelopes
across multiple occupants. Practical question: does coverage degrade
gracefully as occupant count grows?
Result: 2D chest-centric + N=5 + multi-subject union = 100% coverage
for households of 1-4 occupants. N=4 knee returns.
| Scenario | # zones | Cov @ N=5 |
|------------|--------:|----------:|
| 1 occupant | 1 | 100% |
| 2 occupants| 2 | 100% |
| 3 occupants| 3 | 100% |
| 4 occupants| 4 | 100% |
4-occupant saturation: N=4 = 99.0% (+26.1 pp marginal), N=5 = 100%,
N=6+ saturated. Knee at N=4 even for 4 occupants.
Cross-eval: single-subject placement gets 70.6% on 4 zones; multi-
subject-optimised gets 100%. +29.4 pp gain from multi-subject
optimisation. CLI MUST accept multiple --target args and compute union.
Why N=4 knee returns: each chest zone is 40x40 cm, fits inside one
Fresnel ellipsoid (~40 cm wide at midpoint of 5 m link). N=4 anchors
give 6 pairwise links, enough to cover 4 disjoint chest zones without
much waste. Chest-centric multi-subject is the SWEET SPOT for Fresnel
envelope geometry.
R6 family complete (9 ticks: R6, R6.1, R6.2, R6.2.1, R6.2.2, R6.2.2.1,
R6.2.3, R6.2.4, R6.2.5). Family's ship recipe:
- 2D chest-centric + multi-subject + N=5 = 100% coverage
Productisation CLI spec (50 LOC over original R6.2):
wifi-densepose plan-antennas
--room W H [Z] # 2D or 3D
--target NAME X Y W H [DX DY DZ] # repeatable
--target-mode {body, chest} # R6.2.3
--freq-ghz F
--n-anchors N # auto-saturation if omitted
--restarts K
Honest scope: 2D only (3D multi-subject = mechanical extension), static
positions, single 5x5 m geometry, greedy with 4 restarts, 4 occupants
max tested.
Composes:
- R6.2 / R6.2.3 direct extension (single -> multi)
- R6.2.2 / R6.2.4 same saturation behaviour
- R14 V1/V2/V3 in households of 2-4 use this recipe
- R3 / ADR-024 per-subject identity + multi-subject placement
- ADR-105/106/107 federation orthogonal
- R12 PABS multi-subject coverage = multi-subject intrusion detection
Coordination: ticks/tick-27.md, no PROGRESS.md edit.
|
||
|---|---|---|
| .. | ||
| environment | ||
| happiness-vector | ||
| medical | ||
| research-sota | ||
| sleep | ||
| stress | ||
| three.js | ||
| README.md | ||
| ruview_live.py | ||
README.md
Examples
Real-time sensing applications built on the RuView platform.
Unified Dashboard (start here)
pip install pyserial numpy
python examples/ruview_live.py --csi COM7 --mmwave COM4
The live dashboard auto-detects available sensors and displays fused vitals, environment data, and events in real-time. Works with any combination of sensors.
Individual Examples
| Example | Sensors | What It Does |
|---|---|---|
| ruview_live.py | CSI + mmWave + Light | Unified dashboard: HR, BR, BP, stress, presence, light, RSSI |
| Medical: Blood Pressure | mmWave | Contactless BP estimation from HRV |
| Medical: Vitals Suite | mmWave | 10-in-1: HR, BR, BP, HRV, sleep stages, apnea, cough, snoring, activity, meditation |
| Sleep: Apnea Screener | mmWave | Detects breathing cessation events, computes AHI |
| Stress: HRV Monitor | mmWave | Real-time stress level from heart rate variability |
| Environment: Room Monitor | CSI + mmWave | Occupancy, light, RF fingerprint, activity events |
Hardware
| Port | Device | Cost | What It Provides |
|---|---|---|---|
| COM7 | ESP32-S3 (WiFi CSI) | ~$9 | Presence, motion, breathing, heart rate (through walls) |
| COM4 | ESP32-C6 + Seeed MR60BHA2 | ~$15 | Precise HR/BR, presence, distance, ambient light |
Either sensor works alone. Both together enable fusion (mmWave 80% + CSI 20%).
Quick Start
pip install pyserial numpy
# Unified dashboard (recommended)
python examples/ruview_live.py --csi COM7 --mmwave COM4
# Blood pressure estimation
python examples/medical/bp_estimator.py --port COM4
# Sleep apnea screening (run overnight)
python examples/sleep/apnea_screener.py --port COM4 --duration 28800
# Stress monitoring (workday session)
python examples/stress/hrv_stress_monitor.py --port COM4 --duration 3600
# Room environment monitor
python examples/environment/room_monitor.py --csi-port COM7 --mmwave-port COM4
# CSI only (no mmWave)
python examples/ruview_live.py --csi COM7 --mmwave none