wifi-densepose/examples/research-sota
rUv 3d3d54d523
research(R3.1): physics-informed env prediction at raw-CSI level — NEGATIVE (architecture-error) (#723)
R3's 'next research lever' was: use R6.1 forward operator + room map
to predict env_sig without labelled examples in the new room. R6.1
shipped (tick 18); this tick implements the prediction.

Result: at raw-CSI level, all three approaches collapse to chance.

| Configuration                          | 1-shot K-NN |
|----------------------------------------|------------:|
| Within-room baseline                   |    100%    |
| Cross-room RAW                         |     10%    | (chance)
| Cross-room labelled MERIDIAN (oracle)  |     10%    | (chance)
| Cross-room physics-informed            |     10%    | (chance)

Even the LABELLED oracle fails at raw-CSI level -- which is the
diagnostic. The cross-room problem at raw-CSI level is fundamentally
harder than at the AETHER embedding level (R3 tick 12) because
position-dependent within-room variance dominates per-subject
signature when invariantisation hasn't been done.

Corrected architecture:
  raw CSI -> AETHER embedding -> physics-informed env subtraction -> K-NN
  (apply physics prediction at embedding level, NOT raw level)

AETHER does position-invariance; predicted-env then removes only the
room-shift component.

THIS IS THE LOOP'S THIRD KIND OF NEGATIVE RESULT:
1. Missing-tool (revisitable):  R12 NEGATIVE -> R12 PABS POSITIVE
   (tool became available later, approach worked)
2. Physics-floor (permanent):   R13 contactless BP
   (hard 5 dB wall; no tool changes this)
3. Architecture-error (correctable): R3.1 (this tick)
   (right idea, wrong application level; corrected architecture
   explicit but not yet implemented)

Categorising negatives by resolution path is itself a research
contribution.

Surfaces an architecture error BEFORE implementation. A future
engineer attempting 'subtract predicted env from raw CSI' would
waste weeks; R3.1 documents the failure path.

Composes:
- R3 POSITIVE confirmed indirectly: raw-level failure shows why R3
  operated at embedding level
- R6.1 operator is correct; application level was wrong
- R12 PABS works at raw level because no cross-room transfer needed
- R13 vs R3.1: two different kinds of negative

Honest scope: weak per-subject signature (body-size only), 3 positions
per room, geometry-specific. Richer biometric input or per-position-
clustering might partially rescue raw-level but defeats the no-label
spirit.

Coordination: ticks/tick-20.md, no PROGRESS.md edit.
2026-05-22 04:04:38 -04:00
..
r1_toa_crlb.py research(R1): ToA CRLB — precision floor for WiFi multistatic localisation (#711) 2026-05-22 01:38:35 -04:00
r1_toa_crlb_results.json research(R1): ToA CRLB — precision floor for WiFi multistatic localisation (#711) 2026-05-22 01:38:35 -04:00
r3_1_physics_env_results.json research(R3.1): physics-informed env prediction at raw-CSI level — NEGATIVE (architecture-error) (#723) 2026-05-22 04:04:38 -04:00
r3_1_physics_informed_env.py research(R3.1): physics-informed env prediction at raw-CSI level — NEGATIVE (architecture-error) (#723) 2026-05-22 04:04:38 -04:00
r3_crossroom_reid.py research(R3): cross-room re-ID — MERIDIAN closes the env-shift gap + 4 privacy constraints (#715) 2026-05-22 02:13:10 -04:00
r3_reid_results.json research(R3): cross-room re-ID — MERIDIAN closes the env-shift gap + 4 privacy constraints (#715) 2026-05-22 02:13:10 -04:00
r5_subcarrier_saliency.py research(sota): kick off SOTA research loop + first R5 saliency measurement (#702) 2026-05-21 23:05:55 -04:00
r6_1_multiscatterer.py research(R6.1): multi-scatterer Fresnel — discovers 4.7 dB penalty matching R13's 5-dB shortfall (#721) 2026-05-22 03:36:42 -04:00
r6_1_multiscatterer_results.json research(R6.1): multi-scatterer Fresnel — discovers 4.7 dB penalty matching R13's 5-dB shortfall (#721) 2026-05-22 03:36:42 -04:00
r6_2_2_multistatic_placement.py research(R6.2.2): N-anchor multistatic placement saturation — practical knee at N=5 (#720) 2026-05-22 03:17:14 -04:00
r6_2_2_multistatic_results.json research(R6.2.2): N-anchor multistatic placement saturation — practical knee at N=5 (#720) 2026-05-22 03:17:14 -04:00
r6_2_antenna_placement.py research(R6.2): Fresnel-aware antenna placement — 93x sensing-coverage lift from physics alone (#719) 2026-05-22 03:04:17 -04:00
r6_2_placement_results.json research(R6.2): Fresnel-aware antenna placement — 93x sensing-coverage lift from physics alone (#719) 2026-05-22 03:04:17 -04:00
r6_fresnel_results.json research(R6): Fresnel-zone forward model — bedrock physics for CSI sensitivity (#710) 2026-05-22 01:31:09 -04:00
r6_fresnel_zone.py research(R6): Fresnel-zone forward model — bedrock physics for CSI sensitivity (#710) 2026-05-22 01:31:09 -04:00
r7_multilink_consistency.py research(R7): Stoer-Wagner mincut detects adversarial CSI nodes 3/3 in synthetic (#704) 2026-05-21 23:28:46 -04:00
r7_multilink_consistency_results.json research(R7): Stoer-Wagner mincut detects adversarial CSI nodes 3/3 in synthetic (#704) 2026-05-21 23:28:46 -04:00
r8_rssi_only_count.py research(R8): RSSI-only person count retains 95% of full-CSI accuracy (#703) 2026-05-21 23:18:09 -04:00
r8_rssi_only_results.json research(R8): RSSI-only person count retains 95% of full-CSI accuracy (#703) 2026-05-21 23:18:09 -04:00
r9_rssi_fingerprint_knn.py feat(tools/ruview-mcp): M2 — wire real inference via cog health (#706) 2026-05-21 23:43:32 -04:00
r9_rssi_fingerprint_results.json feat(tools/ruview-mcp): M2 — wire real inference via cog health (#706) 2026-05-21 23:43:32 -04:00
r10_foliage_attenuation.py research(R10): through-foliage wildlife sensing — physics feasibility + per-species gait taxonomy 2026-05-22 00:59:11 -04:00
r10_foliage_results.json research(R10): through-foliage wildlife sensing — physics feasibility + per-species gait taxonomy 2026-05-22 00:59:11 -04:00
r11_maritime_propagation.py research(R11): maritime sensing — through-bulkhead impossible, through-seam works (#712) 2026-05-22 01:53:51 -04:00
r11_maritime_results.json research(R11): maritime sensing — through-bulkhead impossible, through-seam works (#712) 2026-05-22 01:53:51 -04:00
r12_pabs_implementation.py research(R12 PABS): NEGATIVE -> POSITIVE — 1161x detection lift via R6.1 forward model (#722) 2026-05-22 03:49:41 -04:00
r12_pabs_results.json research(R12 PABS): NEGATIVE -> POSITIVE — 1161x detection lift via R6.1 forward model (#722) 2026-05-22 03:49:41 -04:00
r12_rf_weather_eigenshift.py research(R12): RF weather mapping eigenshift — negative-ish, with clearly-actionable revision path (#707) 2026-05-21 23:52:49 -04:00
r12_rf_weather_results.json research(R12): RF weather mapping eigenshift — negative-ish, with clearly-actionable revision path (#707) 2026-05-21 23:52:49 -04:00
r13_bp_physics_floor.py research(R13): NEGATIVE — contactless BP from CSI is physically inferior to a cuff (#713) 2026-05-22 02:00:35 -04:00
r13_bp_results.json research(R13): NEGATIVE — contactless BP from CSI is physically inferior to a cuff (#713) 2026-05-22 02:00:35 -04:00