* fix: provision.py esptool v5 syntax + refuse partial NVS flashes (#391)
Bug 1: `write_flash` -> `write-flash` for esptool v5.x compat
- Actual flash command (flash_nvs, line 153) was already fixed
- Dry-run manual-flash hint (line 301) still printed old syntax
Bug 2: Refuse partial invocations that would silently wipe NVS
- provision.py flashes a fresh NVS binary at offset 0x9000, which
REPLACES the entire csi_cfg namespace. Any key not passed on the
CLI is erased.
- Previously: `provision.py --port COM8 --target-port 5005` would
silently wipe ssid, password, target_ip, node_id, etc., causing
"Retrying WiFi connection (10/10)" in the field.
- Now: refuse unless all of --ssid/--password/--target-ip provided,
or --force-partial is set (prints warning listing wiped keys).
Validation:
- Dry-run: binary generates to 24576 bytes, hint uses write-flash
- Safety check: partial invocation rejected with clear message
- Force-partial: warning lists keys that will be wiped
- Hardware: esptool v5.1.0 `read-flash 0x9000 0x100` works on
attached ESP32-S3 (COM8); NVS preserved, device reconnected at
192.168.1.104 with node_id=2 intact after reset.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs: CHANGELOG catch-up for v0.5.5, v0.6.0, v0.7.0 (#367)
The changelog was stale at v0.5.4 — three releases were cut without
updating it. Added full entries for each, plus an [Unreleased] block
for the #391 provision.py fixes.
version.txt correctly stays at 0.6.0 — v0.7.0 was a model/pipeline
release, not a new firmware binary. Latest firmware is v0.6.0-esp32.
Closes#367
Co-Authored-By: claude-flow <ruv@ruv.net>
6e015c4626