Three fixes wrapped for the v0.6.5-esp32 release tag:
1. **`sdkconfig.defaults` adds `CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=8192`**.
The fix was already in `sdkconfig.defaults.template` (ADR-081, prevents
"stack overflow in task Tmr Svc" bootloop when adaptive_controller emits
feature_state from inside a Timer Svc callback). It was MISSING from the
canonical `sdkconfig.defaults` file used by the build, so any fresh
build picked up the 2 KiB FreeRTOS default and bootlooped on hardware.
Verified on COM7: with the fix, no panics in 30 s of operation; without
it, "***ERROR*** A stack overflow in task Tmr Svc has been detected."
followed by sustained bootloop.
2. **`ota_update.c` extracts `ota_load_psk_from_nvs()` and calls it from
both `ota_update_init()` and `ota_update_init_ex()`.** `main.c:230` uses
the `_ex` variant, but only `ota_update_init()` was loading the PSK
from NVS. Result: `s_ota_psk` stayed empty regardless of NVS contents,
so the RuView#596 fail-closed posture rejected every request — but the
diagnostic warning never printed at boot, leaving operators no signal
about why their OTA uploads were 403'ing. Verified on COM7:
W (3126) ota_update: NVS namespace 'security' not found —
OTA upload endpoint will REJECT all requests until provisioned.
Fail-closed per RuView#596.
3. **`version.txt`: 0.6.4 → 0.6.5**, paired with the v0.6.5-esp32 tag so the
firmware-ci version-guard job (RuView#505 fix-marker) stays happy.
Both validations done end-to-end on hardware (COM7, ESP32-S3 8MB,
provisioned with --edge-tier 2 to also incidentally re-verify #438 is not
reproducible on current main).
version.txt on main was still 0.6.2. CMake reads PROJECT_VER from it, so
esp_app_get_description()->version (and the boot log line) reported 0.6.2
for any source build — and v0.6.3-esp32 shipped a release binary that
internally identified as 0.6.2 because the bump never landed on main.
- version.txt: 0.6.2 -> 0.6.4 (matches the latest release tag)
- firmware-ci.yml: new `version-guard` job that runs on v*-esp32 tag
pushes and fails the run if the tag's X.Y.Z != version.txt, so a
future release can't ship a mislabeled binary.
Closes#505
Co-Authored-By: claude-flow <ruv@ruv.net>
version.txt → 0.6.2.
firmware-ci.yml: matrix-build both 8MB (sdkconfig.defaults) and 4MB
(sdkconfig.defaults.4mb) variants, uploading variant-named artifacts
(esp32-csi-node.bin / esp32-csi-node-4mb.bin, partition-table.bin /
partition-table-4mb.bin). Unblocks 6-binary releases from CI alone,
no local ESP-IDF required.
CHANGELOG: promote [Unreleased] ADR-081 work into [v0.6.2-esp32],
plus Fixed entries for Timer Svc stack overflow and the
fast_loop_cb → emit_feature_state implicit-decl compile error.
Validation: 30 s run on ESP32-S3 (MAC 3c:0f:02:e9:b5:f8), 149
rv_feature_state emissions, no stack overflow, HEALTH mesh packet sent.
Co-Authored-By: claude-flow <ruv@ruv.net>
- Add version.txt (0.6.0) read by CMakeLists.txt so
esp_app_get_description()->version matches the release tag
- Log firmware version on boot: "v0.6.0 — Node ID: X"
- Remove stale Kconfig help text (said default 2.0, actual is 15.0)
Fixes the version mismatch reported in #354 where flashing v0.5.3
binaries showed v0.4.3 because PROJECT_VER was never set.
Co-Authored-By: claude-flow <ruv@ruv.net>
rUv