* perf(signal): hoist FFT planner across subcarriers (ADR-154 §7.4 #20)
compute_multi_subcarrier_spectrogram called compute_spectrogram once per
subcarrier, and each call built a fresh FftPlanner + re-planned the same
length-window_size FFT. Hoist the plan + window out of the per-subcarrier
loop via a new compute_spectrogram_with_plan core that takes a pre-planned
Arc<dyn Fft> and pre-built window. compute_spectrogram delegates to it
(unchanged behaviour); the multi-subcarrier path plans once and reuses.
MEASURED-HOT (dsp_perf_bench, this box): at 56 subcarriers, window 128,
fresh-planner-per-subcarrier 467.88 µs -> hoisted-plan 254.75 µs = 1.84x;
window 256: 627.27 µs -> 448.39 µs = 1.40x. Plan-forward cost alone is
~1.86 µs (w128), x56 subcarriers ~= the removed delta.
Output is bit-identical: multi_subcarrier_hoisted_plan_bit_identical
compares f64::to_bits of every spectrogram value + freq/time resolution
against the per-call fresh-planner path across all 4 window functions x
{power,magnitude} on a 56-subcarrier matrix. The numeric STFT body is the
old loop verbatim; only plan/window construction is lifted.
Co-Authored-By: claude-flow <ruv@ruv.net>
* test(signal): boundary/tolerance tests for ADR-154 §7.4 #14#16#19
Three "+ test" backlog gaps closed — pure additions, no behaviour change
(phase_align refactor is internal: estimate_phase_offsets still returns the
identical offset vector; a counted core is split out only to observe the
iteration count).
#14 cir.rs fft_operator — fft_operator_within_tolerance_of_dense_canonical56:
the opt-in FFT Φ/Φᴴ path changes the witness hash, so pin it numerically
CLOSE to the dense path (not silently divergent). Asserts the full Cir
output (every tap within 1e-2·dominant, dominant idx/ratio, active_tap_count,
ranging_valid, rms_delay_spread) on the production canonical-56 config
across τ ∈ {20,50,90} ns. Extends the existing HT20/single-τ test.
#16 phase_align.rs — refinement_terminates_at_iteration_cap_when_not_converging:
forces non-convergence (tolerance=0.0, unreachable) and asserts the loop
runs exactly max_iterations then returns — proving the cap, not convergence,
bounds the loop (no infinite spin). Companion
refinement_converges_before_cap_on_easy_input proves the cap is an upper
bound, not the only exit.
#19 csi_ratio.rs — ratio_finite_at_and_below_1e_12_epsilon: the module
implements the CSI ratio as the conjugate product H_i·conj(H_j) (no
division), so it is finite even at/below the 1e-12 magnitude boundary a
naive H_i/H_j division would need an epsilon to guard. Pins finiteness +
bit-exact conjugate product at the boundary (zero target → zero, never
inf/NaN), through the amplitude/phase extraction.
cargo test -p wifi-densepose-signal --no-default-features --lib: 447 passed,
0 failed; --features cir --lib: 447 passed, 0 failed.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs(adr-154): record Milestone-2 P2-perf verdicts + boundary tests (§7.4)
§7.4: #20 MEASURED-HOT (1.40–1.84× spectrogram FFT-plan hoist, bit-identical);
#5/#6/#7 MEASURED-NULL (benched, not hot, left as-is — sub-µs / stack-only /
alloc-once); #8 MEASUREMENT-ONLY (per-call 56×56 eigh cost; eigenvalue/BLAS
backend un-buildable on this Windows host, number deferred to a BLAS box, NOT
fabricated; also corrects the finding — extract_perturbation reuses cached
modes, the recompute is in estimate_occupancy). #14/#16/#19 RESOLVED (tolerance
/ convergence-cap / epsilon-boundary tests). Updated §7.4 intro + Horizon-ledger
(deferred count 41→36). CHANGELOG [Unreleased] entry added.
Co-Authored-By: claude-flow <ruv@ruv.net>
* bench(signal): committed P2 bench-first benches (ADR-154 §7.4 #5/#6/#7/#8/#20)
New dsp_perf_bench.rs backs every Milestone-2 perf verdict with a committed
criterion bench — no speedup claimed without a before/after number here, and
a benched NULL is the proof a micro-opt was unnecessary (the §5.x "already
amortized" pattern). Registered in Cargo.toml [[bench]].
MEASURED (this box, criterion medians):
#20 spectrogram_multi_subcarrier (fresh vs hoisted plan):
MEASURED-HOT — 467.88→254.75 µs (1.84x) @ sc56/w128; 627.27→448.39 µs
(1.40x) @ sc56/w256. Optimized in the prior commit.
#5 multistatic_attention/weights: MEASURED-NULL — 181 ns (2 nodes) ..
848 ns (8 nodes); sub-µs, no hot-path alloc — left as-is.
#6 tomography_reconstruct/solve: MEASURED-NULL — 47.5 µs (16 links) /
60.4 µs (32 links) for a full 50-iter ISTA solve; the 2 per-solve voxel
buffers (~4 KB) are negligible vs O(iters·links·voxels) compute, and
reconstruct(&self) reuses them across iterations already — left as-is.
#7 pose_kalman_update/cycles: MEASURED-NULL — 150 ns (17 kpts) / 2.82 µs
(170); the Kalman "gain matrices" are fixed-size STACK arrays
([[f32;3];6]), zero heap — nothing to reuse — left as-is.
#8 field_model_occupancy (eigenvalue feature): MEASUREMENT-ONLY — quantifies
the per-call n×n eigendecomposition cost; incremental SVD is a sized
future project, not attempted (number recorded in ADR-154 §7.4).
Reproduce:
cargo bench -p wifi-densepose-signal --no-default-features --bench dsp_perf_bench
cargo bench -p wifi-densepose-signal --bench dsp_perf_bench # adds #8
Cargo.lock: dev-dep (criterion/clap) graph + crate version bumps from the
build; no runtime-dependency change.
Co-Authored-By: claude-flow <ruv@ruv.net>
* fix(signal): circular phase variance for ghost-tap guard (ADR-154 §7.4 #1)
`phase_variance` computed a LINEAR sample variance over phase angles that
wrap at ±π, so a tightly-clustered set straddling the branch cut reported
spuriously HIGH dispersion — false-tripping the `> TAU` ghost-tap guard on
real, tightly-clustered CIR taps.
Replace with Mardia's circular variance V = 1 − R̄, bounded [0,1] and
invariant to where the cluster sits on the circle. Re-derive the guard
against the bounded metric via a named const
`GHOST_TAP_CIRCULAR_VARIANCE_MAX` (the old TAU-scaled threshold is
meaningless on [0,1]).
Grade: metric fix MEASURED; threshold value DATA-GATED — a clean single-path
ramp also sweeps the circle, so V alone cannot separate clean from
unsanitized without labelled frames. Conservative default (0.99) errs toward
never false-rejecting, strictly more permissive at the wrap boundary than the
buggy linear guard.
Fails-on-old test: `phase_variance_circular_not_fooled_by_branch_cut` —
inlines the old linear variance to show it exceeds TAU on wrap-straddling
phases while circular V≈0 and the guard no longer trips. Plus
`phase_variance_circular_is_bounded_and_extremal` (V∈[0,1], V≈0 identical,
V≈1 uniform).
cargo test -p wifi-densepose-signal --no-default-features --features cir --lib
→ 432 passed, 0 failed.
Co-Authored-By: claude-flow <ruv@ruv.net>
* fix(signal): pin Welford n=0/n=1 finiteness guard (ADR-154 §7.4 #10)
The shared `WelfordStats` (field_model.rs, used by longitudinal.rs and others)
relies on `count < 2` guards in `variance`/`sample_variance`/`std_dev`/
`z_score` to stay finite at the boundaries. The guards existed but the n=0
boundary was UNTESTED — exactly the §4 divide-by-(n−1) family the ADR groups
this with.
Add `welford_finite_at_n0_and_n1` asserting every statistic is finite and
returns the documented sentinel (0.0) at n=0 and n=1, plus load-bearing doc
comments on the two guards.
Fails-on-old proof: with the `sample_variance` guard removed, the test FAILS
with "attempt to subtract with overflow" at the `(self.count - 1)` underflow
(0usize − 1); `variance` would similarly yield 0.0/0.0 = NaN. The guard is
restored; the test pins it so a future regression is caught.
Grade: MEASURED (boundary finiteness is asserted; the guard is the §4-family
fix made testable).
cargo test -p wifi-densepose-signal --no-default-features --lib field_model
→ 22 passed, 0 failed.
Co-Authored-By: claude-flow <ruv@ruv.net>
* refactor(signal): de-magic adversarial thresholds + boundary tests (ADR-154 §7.4 #13)
Lift the bare numeric literals buried in `check`/`check_consistency` into
named, documented module consts (FIELD_MODEL_GINI_VIOLATION=0.8,
ENERGY_RATIO_HIGH_VIOLATION=2.0, ENERGY_RATIO_LOW_VIOLATION=0.1,
CONSISTENCY_ACTIVE_FRACTION_OF_MEAN=0.1, SCORE_W_* weights). VALUES UNCHANGED —
each const equals the original literal; only names + pinning tests are new.
Grade: DATA-GATED. The operating values stay empirical (defensible values need
labelled spoofed/clean CSI — Wi-Spoof, §6.2/§7.3). The de-magicking +
characterization tests are MEASURED: `tuning_consts_unchanged_from_literals`,
`energy_ratio_high_boundary`, `energy_ratio_low_boundary`,
`field_model_gini_boundary`, `consistency_active_fraction_boundary` pin the
decision boundaries at/just-below/just-above each threshold, so a future
data-driven retune is a visible, tested change.
Fails-on-change proof: bumping ENERGY_RATIO_HIGH_VIOLATION 2.0→3.0 makes
`energy_ratio_high_boundary` FAIL (restored). Operating values explicitly
NOT changed.
cargo test -p wifi-densepose-signal --no-default-features --lib ruvsense::adversarial
→ 20 passed, 0 failed.
Co-Authored-By: claude-flow <ruv@ruv.net>
* refactor(signal): de-magic coherence drift/gate thresholds (ADR-154 §7.4 #9)
Lift the bare detection literals in `coherence.rs::classify_drift`
(DRIFT_STABLE_SCORE=0.85, DRIFT_STEP_CHANGE_MAX_STALE=10) and the
`coherence_gate.rs` Default impl (DEFAULT_ACCEPT_THRESHOLD=0.85,
DEFAULT_REJECT_THRESHOLD=0.5, DEFAULT_MAX_STALE_FRAMES=200,
DEFAULT_PREDICT_ONLY_NOISE=3.0) into named, documented consts. VALUES
UNCHANGED. The gate already exposed these via GatePolicyConfig (config seam);
this names + pins the defaults.
Grade: DATA-GATED. Operating values stay empirical (defensible Z-score
thresholds need labelled stable/drifting coherence traces). De-magicking +
boundary tests are MEASURED: `classify_drift_stable_score_boundary`,
`classify_drift_stale_count_boundary` pin the at/just-below/just-above
decisions; `drift_consts_unchanged_from_literals` /
`gate_default_consts_unchanged_from_literals` pin the values. Operating values
explicitly NOT changed.
cargo test -p wifi-densepose-signal --no-default-features --lib ruvsense::coherence
→ 40 passed, 0 failed.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs(adr-154): mark §7.4 P1 backlog cleared — Milestone-1 (#1,#10 RESOLVED; #9,#13 DATA-GATED)
Update ADR-154 §7.4 backlog rows #1, #9, #10, #13 with commit refs + grades,
the §7.4 intro count (four P1 items cleared, ~41 P2/P3 remain), the
Horizon-ledger one-liner (Milestone-1 DONE), and the §8 honest-limits #1 line
(metric now correct; threshold still DATA-GATED). Add CHANGELOG [Unreleased]
entry.
Grades: #1 RESOLVED (MEASURED metric / DATA-GATED threshold), #10 RESOLVED
(MEASURED), #9 & #13 RESOLVED-PARTIAL (DATA-GATED — de-magicked + boundary
tested, operating values unchanged).
Validation: cargo test --workspace --no-default-features → 2057 passed, 0
failed; wifi-densepose-signal lib → 442 passed (no-default + --features cir);
python archive/v1/data/proof/verify.py → VERDICT: PASS, hash f8e76f21…46f7a
UNCHANGED (CIR ghost-tap guard is not on the deterministic proof path).
Co-Authored-By: claude-flow <ruv@ruv.net>
* fix(sensing-server): stop leaking internal errors in HTTP responses (ADR-080 #2)
Six handlers in `main.rs` serialized the internal error `Display` straight
into the JSON response body, leaking server internals to any client (ADR-080
finding #2, CWE-209; reframed onto the Rust boundary by ADR-164 G11):
- edge_registry_endpoint: a panicked spawn_blocking `JoinError`
("task … panicked") in a 500, and the raw upstream error in a 503
- delete_model / delete_recording / start_recording: std::io::Error
strings carrying OS detail / filesystem paths
- calibration_start / calibration_stop: the FieldModel error chain
New `error_response` module: `internal_error` / `internal_error_json` /
`upstream_unavailable` log the full detail server-side only (tagged with a
correlation id) and return a generic body
(`{"error":"internal_error","correlation_id":…}`) — no `panicked`, no file
paths, no Debug chain. The correlation id lets an operator join a client
report to the exact server log line without ever shipping the detail.
Pinned by 5 error_response tests, incl. a leak-substring guard
(internal_error_body_does_not_leak_detail) verified to FAIL on the reverted
old body (returns the panic message / path / "os error"). The HOMECORE sweep
(ADR-161) covered homecore-server, not this crate.
Co-Authored-By: claude-flow <ruv@ruv.net>
* test(sensing-server): pin XFF-immunity + no-query-token (ADR-080 #1, #3)
Findings #1 (XFF-spoofing bypass) and #3 (JWT-in-URL, CWE-598) were logged
against the Python v1 API but are VERIFIED ABSENT on the current Rust
sensing-server, so they get regression tests rather than redundant fixes:
- #1 XFF: there is no IP-based rate-limiter or IP-allowlist to bypass, and
neither security middleware reads a forwarded header. Added
bearer_auth::xff_header_never_affects_auth_decision (spoofed
X-Forwarded-For never flips a 401<->200 decision) and
host_validation::forwarded_headers_never_bypass_host_allowlist (spoofed
X-Forwarded-Host: localhost never lets Host: evil.com past the allowlist).
- #3 JWT-in-URL: require_bearer reads the token only from the Authorization
header; WS handlers take no query token; the sole Query extractor
(EdgeRegistryParams) is a non-secret refresh flag. Added
bearer_auth::query_string_token_is_never_accepted — ?token= / ?access_token=
in the URL never authenticates (stays 401) while the header path still 200s.
Verified to FAIL when a query-token path is injected into require_bearer.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs(adr-080): mark P0 security findings #1-#3 RESOLVED; close ADR-164 G11
- ADR-080: Status note + per-finding closure (#1 XFF and #3 JWT-in-URL
verified absent + regression-pinned; #2 leaked errors fixed via the
error_response module). Records the v1-vs-Rust boundary distinction
explicitly: v1 paths remain archived; this closure governs the shipped
Rust sensing-server.
- ADR-164: Gap Register G11 and the Open/Gated Backlog entry marked
RESOLVED with the fix + branch reference.
- CHANGELOG: [Unreleased] -> ### Security entry covering all three findings.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs(adr): renumber 6 displaced ADRs to resolve duplicate-number collisions (ADR-164 G1)
Resolves the 5 duplicate ADR numbers (6 displaced files) flagged by ADR-164
Gap Register item G1. Canonical keeper per number = first file committed at
that number (date tie-broken by inbound cross-reference count / parent-appendix
relationship). Displaced files renumbered to the next free numbers (166-171):
050 keeps provisioning-tool-enhancements (5 refs vs 1)
-> ADR-166-quality-engineering-security-hardening
052 keeps tauri-desktop-frontend (parent ADR)
-> ADR-167-ddd-bounded-contexts (its appendix)
147 keeps nvidia-cosmos/OccWorld (the actual ADR, has Status header)
-> ADR-168-benchmark-proof (proof companion, no Status)
-> ADR-169-adam-mode-light-theme (was untracked)
148 keeps drone-swarm-control-system (committed #862)
-> ADR-170-yoga-mode-pose-system (was untracked)
149 keeps public-community-leaderboard-huggingface (committed 16:47 vs 17:38)
-> ADR-171-swarm-benchmarking-evaluation-methodology
Updates in-file `# ADR-NNN` headers and intra-file self-references (yoga-modes
* docs(adr): repoint inbound cross-references to renumbered ADRs (166-171)
Follow-up to the ADR renumbering (ADR-164 G1). Updates every inbound reference
that pointed at a displaced ADR, disambiguating shared numbers by title/slug so
only references to the DISPLACED topic move and keeper references stay put.
ADR-168 (was 147 benchmark-proof): README, CHANGELOG, user-guide,
proof-of-capabilities, research docs 00/03 — all path/label refs updated.
ADR-169 (was 147 adam-mode) / ADR-170 (was 148 yoga-mode): docs/adr/README index.
ADR-171 (was 149 swarm-benchmarking): all ruview-swarm eval code+docs
(Cargo.toml, evals/, eval_swarm.rs, metrics/mod/report/runner.rs), research
doc 03 (every §-ref matched ADR-171 sections, not AetherArena), 00-system-review,
series README, CHANGELOG, and ADR-148's forward/"open issues" pointers.
ADR-166 (was 050 quality-engineering / security-hardening): disambiguated from the
ADR-050 provisioning KEEPER by topic. The HMAC/secure_tdm, directory-traversal,
bind-address, and OTA-PSK-auth references in code comments
(wifi-densepose-hardware Cargo.toml + secure_tdm.rs, sensing-server main.rs) and
in ADR-052-tauri / ADR-167 all describe the security-hardening ADR -> ADR-166.
ADR-167 (was 052 ddd-appendix): inbound appendix references.
Index/registry updates: docs/adr/README.md, gap-analysis/census.md (rows +
header count), gap-analysis/lens-findings.md (collision table marked RESOLVED),
and ADR-164 Gap Register G1 marked RESOLVED with the full renumber map.
Keeper references deliberately untouched: all ADR-147 OccWorld code, all ADR-148
drone-swarm code/docs, all ADR-149 AetherArena refs (incl. ADR-150's SSL/resampling
refs, which ADR-150 explicitly binds to the AetherArena benchmark), ADR-050
provisioning refs, ADR-052 tauri refs. The frozen GitHub blob URLs in
docs/adr/.issue-177-body.md (pinned to an old branch) are left as historical.
Comment-only code edits; no behavior change. wifi-densepose-hardware compiles
clean; the sensing-server build's sole blocker is the pre-existing upstream
midstreamer-temporal-compare@0.2.1 registry crate, unrelated to these edits.
Co-Authored-By: claude-flow <ruv@ruv.net>
MultistaticConfig::default().guard_interval_us was 5_000 us (5 ms) with a
comment claiming "well within the 50 ms TDMA cycle". That is wrong: on an
N-slot TDM schedule node k transmits in slot k, so two nodes are separated by
the slot offset, not clock jitter. A real 2-node mesh (slots 0/1) measured an
18,194 us spread, so every real frame set exceeded the 5 ms guard and fuse()
silently fell back to per-node sum/dedup -- multistatic fusion never ran on
hardware.
- Raise default hard guard to 60 ms (full 50 ms TDMA cycle + 20% jitter
headroom, derived from the slot model and documented in the field doc).
- Raise soft guard to 20 ms (just above the observed 18.2 ms 2-slot spread).
- Add MultistaticConfig::for_tdm_schedule(total_slots, slot_duration_us).
- Keep the honest per-node fallback for genuinely-mismatched frames.
Tests (fail on the old 5 ms default):
- fuse_real_tdm_spread_18194us_fuses_with_default_guard
- configurable_guard_rejects_too_large_spread
- for_tdm_schedule_invariants
Co-Authored-By: claude-flow <ruv@ruv.net>
Two ingest bugs caused real ESP32-C6 HE20 CSI to be silently discarded or
never received — the "real data silently lost" failure class. Each fix is
pinned by a test that fails on the old code.
#1009 §1b — HE20 baseline recorder trimmed 256->242 bins by sequential index.
ESP-IDF v5.5.2 delivers all 256 FFT bins for an HE20 frame, but
CalibrationConfig::he20() carried num_active: 242, so the recorder (no HE20
tone map — extract_first_stream takes the first num_active columns
sequentially) kept bins 0..242 = the lower guard band + DC, NOT the 242 active
tones, silently corrupting the empty-room baseline. Now num_active: 256 records
every delivered bin, aligned 1:1 with the live deviation() path. The exact-242
tone map stays only in cir.rs (HE20_ACTIVE), where the Phi sensing matrix needs
it. HE20 synthetic/bench fixtures updated to feed 256-bin frames.
#1009 §1a/§1c — u8->u16 n_subcarriers truncation, regression-pinned.
The ADR-018 wire format carries n_subcarriers as u16 LE at bytes 6-7; a 256-bin
HE20 frame (byte6=0x00) read as one byte decodes to 0 subcarriers -> every
frame skipped. The CLI parser and the sensing-server parse_esp32_frame were
already corrected to u16 under #1005/ADR-110; added regression tests that fail
on the old single-byte read so the truncation cannot silently return.
#1004 — --source auto latched on simulate forever, never binding UDP :5005.
A one-shot boot probe resolved the source once; with no CSI flowing at boot
(the normal firmware/server startup race) it served simulated poses for the
whole process and ignored real CSI arriving seconds later (the prior #937 fix
hard-exited instead — equally wrong). New plan_source() state machine: in auto
mode ALWAYS bind the UDP receiver and serve simulated only until the first real
frame, then udp_receiver_task promotes source -> esp32 (mirroring the existing
esp32 -> esp32:offline reversion). simulated_data_task self-suspends once
promoted. Explicit --source simulated stays a hard, UDP-free offline override.
Validation: 3-crate tests 1118 passed / 0 failed; workspace 3166 passed /
0 failed; Python proof VERDICT: PASS (bit-exact, unaffected). cir.rs untouched.
Co-Authored-By: claude-flow <ruv@ruv.net>
Two measured, bit-equivalent perf wins. Each ships a criterion bench
(benches/features_bench.rs, new) with before/after numbers and a committed
bit-identity test — no perf claim without a measured before/after.
PSD FFT-planner caching (features.rs)
PowerSpectralDensity::from_csi_data re-planned a FftPlanner on EVERY frame,
and FeatureExtractor::extract calls it per frame on the hot path. New
from_csi_data_with_fft(csi, n, &Arc<dyn Fft>) reuses a plan cached in
FeatureExtractor (built once in new()). Bit-identical output
(psd_cached_fft_bit_identical_to_fresh, f64::to_bits over 6 sizes).
MEASURED (median ns/frame, criterion):
fft=64 5.84µs -> 1.89µs (3.09x)
fft=128 9.31µs -> 3.61µs (2.58x)
fft=256 13.77µs -> 6.73µs (2.04x)
DTW Sakoe-Chiba band (gesture.rs)
dtw_distance computed j_start/j_end but iterated the FULL 1..=m row,
continue-ing out-of-band — band constrained the path, not the work (O(n*m)).
Now iterates j_start..=j_end (O(n*band)), resetting only the two boundary
guard cells the recurrence reads, with endpoint reachability (|n-m|<=band)
at the return. Bit-identical across 12 shapes x 8 bands
(dtw_banded_bit_identical_to_fullrow).
MEASURED (median, criterion):
n=m=100 band=5 33.45µs -> 13.77µs (2.43x)
n=m=200 band=5 122.32µs -> 29.55µs (4.14x)
n=m=200 band=10 159.98µs -> 60.19µs (2.66x)
Reproduce:
cd v2 && cargo bench -p wifi-densepose-signal --no-default-features \
--bench features_bench
Co-Authored-By: claude-flow <ruv@ruv.net>
Milestone-0 correctness/security fixes for the beyond-SOTA signal/DSP sweep.
Every fix ships with a committed regression test (proof, not adjectives).
CRITICAL — ADR-134 CIR coherence gate was DEAD in production
MultistaticFuser fuses canonical-56 frames (hardware_norm.rs resamples every
chipset onto a 56-tone grid), but the gate was wired to CirConfig::ht20()
which expects 64/52. Every estimate() returned SubcarrierMismatch and
cir_gate_coherence silently fell back to freq-domain coherence — use_cir_gate
was indistinguishable from false. Fixes:
- new CirConfig::canonical56() (64-bin HT20 framing, 56 active tones, 168 taps)
- new MultistaticFuser::with_cir_canonical56() (correct default); ht20 kept,
now doc-warned
- active_indices() handles (64,56) + length-matched fallback (no silent
fall-through to the 52-index slice)
- SubcarrierMismatch in the gate now debug_assert!s loudly (config error can
no longer hide as a graceful degrade)
- cir_estimate_first() exposes the Ok/Err verdict for tests
PROOF (ruvsense::multistatic::tests): ht20 → 8/8 Err (dead); canonical56 →
8/8 Ok (alive); coherence(gate on) != coherence(gate off).
CRITICAL — adversarial.rs NaN/inf detector bypass
One non-finite link energy bypassed the whole detector (every `e>thresh`
false on NaN; score clamp returns NaN). A non-finite input is itself the
strongest spoof — now short-circuits to a definite anomaly (score 1.0,
affected link reported) and does not poison the temporal-continuity state.
PROOF: nan_link_energy_flags_anomaly, inf_link_energy_flags_anomaly.
CORRECTNESS — divide-by-(n-1) window trio
csi_processor hamming_window (n=0 usize underflow, n=1 div0), bvp Hann,
spectrogram make_window all guarded for n<=1 (empty / constant-1.0 window).
Python deterministic proof still PASS, same pipeline hash (reference uses n>=2).
PROOF: *_degenerate_sizes / *_size_one_is_finite / make_window_size_0_and_1.
CLARITY — calibration.rs subtract_in_place
Removed the vacuous `if active_input {ki} else {ki}` branch that implied a
full-FFT->bin remap that never existed; documented the sequential
active-index convention (matches sibling extract_first_stream). No behavior
change.
Tests: cargo test -p wifi-densepose-signal --no-default-features (+--features cir)
green; full workspace green; verify.py VERDICT: PASS.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs(research): add RuView beyond-SOTA system review (00)
First document of the beyond-SOTA research series: capability audit of
the current RuView engine with role-to-crate maturity matrix, ruvsense
module inventory, gap analysis, and risk register.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* docs(research): add beyond-SOTA architecture design (02, in progress)
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* docs(research): finalize beyond-SOTA architecture (02)
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* docs(research): add benchmark/validation methodology snapshot (03)
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* docs(research): add beyond-SOTA series index with validation results; changelog
README index ties the 5 research docs together with the session's
measured validation evidence: 2,797 workspace tests / 0 failed, Python
proof PASS (bit-exact), and paired pre/post criterion CIR benchmarks.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* perf(signal): precompute CIR warm-start system; hoist tomography solver allocs
Exact, determinism-safe optimizations (bit-identical float results):
- cir.rs: diag(PhiH Phi)+lambda*I and its CSR matrix depend only on Phi
and lambda (fixed at CirEstimator::new) but were rebuilt every frame
(O(K*G) pass + CSR allocation). Now built once in new() via
build_warm_start_system; summation order unchanged.
- tomography.rs: ISTA gradient buffer hoisted out of the 100-iteration
loop (fill(0.0) reset) and the Frobenius Lipschitz bound moved from
per-reconstruct to construction.
Verified: signal 456 tests green; engine 11/11 green including
cycle_is_deterministic and witness-stability tests. Criterion paired
pre/post: cir_estimate/he40 -3.9% (p<0.01), multiband -1.2/-1.4%.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* fix(worldgraph): bound SemanticState growth with deterministic retention
StreamingEngine::process_cycle appended one SemanticState belief per cycle
with no eviction — ~1.7M nodes/day at 20 Hz (beyond-SOTA roadmap finding #6).
Add WorldGraph::prune_semantic_states(max): deterministic eviction of the
oldest beliefs by (valid_from_unix_ms, id); structural nodes (rooms, zones,
sensors, anchors, tracks, events) are never eligible. Wire it into the
engine after each belief append (DEFAULT_SEMANTIC_RETENTION = 7,200, ~6 min
at 20 Hz; set_semantic_retention to tune). The WorldGraph holds current
beliefs; durable history is the recorder's job, so no audit data is lost.
3 new tests: end-to-end bounded growth, oldest-only eviction, deterministic
equal-timestamp tie-break. Workspace gate: 2,865 passed, 0 failed.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* feat(sensing-server): route live frames through the governed StreamingEngine
Closes the live-trust-path gap (ADR-136 section 8, beyond-SOTA system review):
the running server fused live CSI with the bare MultistaticFuser, while the
privacy/provenance/witness control plane (ADR-135..146) only ever ran on
synthetic in-test frames. The privacy control plane was therefore bypassable
on the real path.
New engine_bridge module drives StreamingEngine::process_cycle from the
server's live NodeState map, reusing the existing NodeState -> MultiBandCsiFrame
conversion. It lazily wires each contributing node as a WorldGraph sensor
(idempotent), bounds belief growth via the retention cap, and forwards explicit
timestamps/calibration ids so the path stays deterministic and replayable.
Wired additively into both live ESP32/WiFi fusion sites in main.rs via a
split-borrow off the write guard, so person-count behavior is unchanged; the
latest BLAKE3 witness is stored on AppState. Every published belief now carries
evidence + model + calibration + privacy decision and a deterministic witness.
Adds wifi-densepose-engine/-worldgraph/-bfld/-geo deps. 6 new bridge tests
(witnessed belief with full provenance, cross-run determinism, idempotent node
registration, retention bound, privacy-mode propagation). sensing-server suite
430+128 green; workspace gate 2,904 passed / 0 failed.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* feat(train): falsifiable occupancy benchmark with anti-overfitting gate
Makes the presence/person-count "beyond SOTA" claim falsifiable in code
instead of aspirational (the unfalsifiability gap from the beyond-SOTA system
review). occupancy_bench grades predictions vs ground truth and gates a SOTA
claim behind one claim_allowed invariant requiring ALL of:
- DataProvenance::Measured — synthetic/mock data is scorable for regression
but never claimable (anti-mock-contamination; the CLAUDE.md Kconfig-bug
lesson made structural).
- A leak-free EvalSplit — validate() refuses any split where a subject OR
environment id appears in both train and test (subject leakage /
per-environment overfitting).
- n_test >= min_test_samples (small-N guard).
- Presence F1 whose bootstrap-CI lower bound (deterministic seeded splitmix64)
clears the threshold — not the point estimate.
- Count MAE within threshold.
The claim string is unreadable except through the gate (NO_CLAIM otherwise),
same discipline as the ruview-gamma acceptance gate. What remains is data, not
method: a frozen, SHA-pinned, subject/environment-disjoint measured replay set
turns the claim into a passing/failing test.
Lives in wifi-densepose-train (the eval bounded context, alongside ablation/
eval/metrics). 10 tests cover each refusal path; warning-clean under the
crate's missing_docs lint. Workspace gate 2,914 passed / 0 failed. Doc 03
updated.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* feat(engine): per-room adapter provenance + drift-to-recalibration advisor
Closes the trust-chain gap where an ~11 KB per-room LoRA adapter (ADR-150
section 3.4) could silently change inference without the witness noticing:
provenance carried only "rfenc-v<N>" with no notion of adapter identity.
- StreamingEngine::set_room_adapter(AdapterInfo): pins the adapter's
content-derived id into provenance model_version
("rfenc-v1+adapter:<id>") — and therefore into the BLAKE3 witness — so
swapping or clearing adapter weights always shifts the witness. Engine test
proves base -> adapter -> other-adapter -> cleared all witness differently
and cleared == base.
- RecalibrationAdvisor: recommends re-running the ADR-135 empty-room baseline
/ refitting the room adapter on sustained low fusion coherence (streak
threshold, default 60 cycles ~ 3 s at 20 Hz) or an ADR-142 change-point.
Surfaced as TrustedOutput::recalibration_recommended, stored on the
sensing-server AppState alongside the witness at both live fusion sites.
- Bridge plumbing: EngineBridge::{set_room_adapter, clear_room_adapter} +
live-path test that the adapter id flows into the live witness.
Scope note (honest): this is the deployable provenance/trigger half of the
"retrained model" roadmap item. Fitting the adapter itself runs in the
existing external calibration service (aether-arena/calibration/); a trained
RF-encoder checkpoint still does not exist in-tree.
Engine 15 tests, bridge 7 tests. Workspace gate: 2,918 passed / 0 failed.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* fix(mat): gate api module behind its feature — standalone no-default-features builds
pub mod api was unconditional while its only dependency, serde, is optional
behind the 'api' feature, so any build without default features failed with
101 unresolved-serde errors (masked in --workspace runs by feature
unification). The api module and its create_router/AppState re-export are now
cfg(feature = "api")-gated with docsrs annotations.
All combos compile: bare --no-default-features (was 101 errors, now 0),
--no-default-features --features api, and full default (177 tests pass).
Workspace gate: 2,918 passed / 0 failed.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* perf(signal): opt-in FFT operator for the CIR ISTA solver (8-14x measured)
Phi is a sub-DFT, so each ISTA mat-vec can run as one length-G FFT
(O(G log G)) instead of a dense O(K*G) product — the dominant-latency-hazard
finding from the beyond-SOTA optimization roadmap.
New CirConfig::fft_operator, default FALSE: the dense path stays the
bit-exact witness default. The FFT evaluates the same sums in a different
order, so enabling it shifts float results in the last bits and requires
regenerating any pinned witness — strictly opt-in per deployment.
FftOperator (rustfft, planned once at CirEstimator::new, scratch buffers
reused across the ISTA loop) dispatches inside ista_solve:
Phi x = scale * forward-FFT(x) sampled at bins (k_idx mod G)
Phi^H v = scale * unnormalised inverse-FFT of v scattered into those bins
Warm-start and Lipschitz estimation stay dense at construction.
Measured (criterion, same run, same machine):
ht20: 2.22 ms -> 265 us (8.4x)
ht40: 10.26 ms -> 717 us (14.3x)
The real HE40 grid (K=484, G=1452) scales further per the O(K*G)/O(G log G)
ratio.
3 new tests: FFT<->dense matvec equivalence to float tolerance on ht20 and
he40 grids; end-to-end dominant-tap agreement on a single-path frame; all
default configs keep FFT off. New cir_estimate_fft bench group.
Workspace gate: 2,921 passed / 0 failed (default path bit-exact, witnesses
unchanged).
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* feat(core): canonical frame decoder — capture-to-claim replay (ADR-136)
The encode half of the ADR-136 frame contract existed (ComplexSample,
to_canonical_bytes, witness_hash) but there was no decoder: a captured
canonical frame could be witnessed but never reconstructed, blocking
replay-from-capture.
CsiFrame::from_canonical_bytes is the exact inverse: same id, metadata,
complex payload, and witness hash (tested as the round-trip law AC7 — the
replayed frame re-encodes byte-identically). Amplitude/phase are recomputed
from the payload (projections, not independent state). Every malformed-input
class fails closed (AC8): header truncation -> Truncated, payload truncation
-> PayloadMismatch, unknown discriminants, non-UTF-8 device id, trailing
bytes. Nil calibration uuid decodes as None per the documented encoding.
Core: 36 tests pass. Workspace gate: 2,937 passed / 0 failed.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* feat(engine): dynamic min-cut mesh partition guard (ruvector-mincut)
Maintains an exact min-cut over the live mesh coupling graph — nodes are
sensing nodes, coupling is the product of fusion attention weights — and
surfaces per cycle, as TrustedOutput::mesh:
- cut value: the global "how close is the array to partitioning" number,
a structural measure per-node heuristics miss;
- weak side: which specific nodes would split off (failure/jamming triage,
feeds ADR-032 posture);
- at-risk flag: counts as a structural event for the drift->recalibration
advisor (alongside ADR-142 change-points).
Degenerate cases fail toward risk: a node with zero coupling is reported as
already partitioned (cut 0, that node as the weak side).
Measured cost policy (criterion, 12-node mesh — the honest part):
- weights quantized (1/64) + change-gated: steady-state cycles do ZERO graph
work and reuse the cached cut (~7.3 us, ~23x cheaper than building);
- on any real change a full exact rebuild (~171 us) is used, because ONE
DynamicMinCut delete+insert measured ~240 us — the subpolynomial machinery
amortizes on much larger graphs, so rebuild-on-change is the measured
optimum at mesh scale (one-edge case -28% after switching policy);
- full process_cycle with the guard: ~33 us for 4 nodes vs the 50 ms budget.
9 mesh_guard tests (weak-node detection, steady-state zero updates,
sub-quantum gating, join/drop rebuild, determinism, disconnection) + an
engine-level wiring test (down-weighted node -> weak side -> recalibration).
Engine 24 tests; workspace gate 2,946 passed / 0 failed.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* feat(engine): mesh partition risk demotes privacy + enters the witness (ADR-032)
Completes the mesh-guard integration: its at_risk signal was advisory-only
(fed the recalibration advisor). It now also contributes to the ADR-141
privacy demotion alongside fusion- and array-level contradictions — a mesh
close to partitioning makes the fused belief less trustworthy, so the cycle
emits at a more restricted class (monotonic; information only removed).
Because effective_class feeds the BLAKE3 witness, a fragmenting array now
shifts the witness: partition risk is auditable, not just logged. The mesh
computation moved ahead of the demotion step in process_cycle; mesh_guard_mut
exposes risk-threshold tuning.
Test: a forced-risk 3-node cycle demotes PrivateHome Anonymous->Restricted
and shifts the witness vs a clean baseline. Engine 25 tests; workspace gate
2,947 passed / 0 failed.
https://claude.ai/code/session_01MjBucx95K4BuUxZi8NWwRH
* fix: public-PR review findings — privacy-path honesty, gate holes, mesh-guard cliff
- sensing-server: engine errors logged+counted (no silent swallow), trust
state exposed via status surface, privacy-demotion claims aligned with
the actual parallel-audit-path behavior
- occupancy_bench: vacuous-F1 hole closed (degenerate test sets fail with
their own criterion); CI-lower-bound test made probative
- mesh_guard: quantization scaled to observed coupling range — >=65-node
balanced meshes no longer permanently at_risk (regression test)
- engine: both wiring tests made probative (same-topology witness compare,
deterministic risk-crossing fixture)
- mat: axum/tokio optional behind api; real serde feature (api enables it)
- core: canonical decoder strict (non-zero reserved bytes and nil UUID
rejected — injective on accepted domain, forged-bytes tests)
- CHANGELOG: un-spliced the FFT/adapter bullet mangle
Co-Authored-By: claude-flow <ruv@ruv.net>
* chore: strip private-track references for public PR
Reword the occupancy-benchmark changelog bullet to drop a cross-reference
to the private research track, and restore the WorldGraph retention bullet
header that was glued onto the preceding MAT bullet.
Co-Authored-By: claude-flow <ruv@ruv.net>
* chore: lockfile refresh for cherry-picked feature set
Co-Authored-By: claude-flow <ruv@ruv.net>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* fix(firmware): on_send ESP-NOW callback compat for IDF v6.0 (closes#944)
ESP-IDF v6.0 changed `esp_now_send_cb_t` from
void (*)(const uint8_t *mac, esp_now_send_status_t status)
to
void (*)(const esp_now_send_info_t *tx_info, esp_now_send_status_t status)
The C6 sync ESP-NOW path's `on_recv` was already version-guarded with
`#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)` (lines 102-112)
but the `on_send` sibling missed the equivalent guard. CI runs against
IDF v5.4 so the regression slipped through; the reporter on IDF v6.0.1
with xtensa-esp-elf esp-15.2.0_20251204 hit:
c6_sync_espnow.c:182:30: error: passing argument 1 of
'esp_now_register_send_cb' from incompatible pointer type
[-Wincompatible-pointer-types]
Fix: mirror the recv guard with `#if ESP_IDF_VERSION_MAJOR >= 6` since
the send-callback signature change happened at IDF v6.0 (not v5.x like
the recv-callback). Both branches ignore the address-side argument
since `on_send` only inspects `status` to bump the TX-fail counter.
Adds `#include "esp_idf_version.h"` so the macro is in scope.
Closes#944
Co-Authored-By: claude-flow <ruv@ruv.net>
* fix(signal): anchor estimate_occupancy noise floor to calibration (closes#942)
`test_estimate_occupancy_noise_only` asserts that 20 noise-only frames
fed through a 50-frame calibrated `FieldModel` yield 0 occupancy.
Failure reported on the upstream Linux + BLAS build.
Root cause
Calibration and estimation each compute their own Marcenko-Pastur
threshold:
threshold = noise_var · (1 + sqrt(p / N))²
with `noise_var` = median of the bottom half of positive eigenvalues
from their own covariance. The MP ratio differs across the two phases:
calibration (50 frames, p=8): ratio = 0.16, factor ≈ 1.96
estimation (20 frames, p=8): ratio = 0.40, factor ≈ 2.66
On a small estimation window the local `noise_var` estimate can also
be smaller than the calibration's (fewer samples → bottom-half median
hits lower-magnitude eigenvalues). The combination of a smaller
noise_var on estimation and the larger MP factor can flip eigenvalues
on/off the "significant" line in a sample-size-dependent way, so an
identical-distribution test window scores `significant >
baseline_eigenvalue_count` and reports phantom persons.
Fix
Persist the calibration `noise_var` on `FieldNormalMode` (new field
`baseline_noise_var: f64`) and use `max(local_noise_var,
baseline_noise_var)` as the noise floor inside `estimate_occupancy`.
This anchors the threshold to the calibration scale and prevents the
short-window collapse without changing behavior when the local
window's own noise dominates (the real-motion case).
`baseline_noise_var` defaults to 0.0 in the diagonal-fallback paths;
the estimation code treats 0.0 as "no anchored floor available" and
preserves the pre-#942 single-window behavior — so older `FieldNormalMode`
instances deserialised from disk continue to work unchanged.
Test results
cargo test --workspace --no-default-features
→ 413 lib tests pass (signal crate), 0 fail, 1 ignored.
The actual `eigenvalue`-gated test still requires BLAS (not buildable
on Windows). Logic-trace via the four numerical anchors above shows
the fix flips `noise_var` from the smaller local value back up to the
calibration scale, dropping `significant` to or below
`baseline_eigenvalue_count` so the saturating subtraction returns 0.
Closes#942
Co-Authored-By: claude-flow <ruv@ruv.net>
The cir_pipeline end-to-end test was gated on the same dominant_tap_ratio
floor; the windowed-ratio fix resolves it. All 6 ADR-134 P2 CIR tests
(cir_synthetic 5 + cir_pipeline 1) now pass. signal+cir: 472 pass / 0 fail.
Co-Authored-By: claude-flow <ruv@ruv.net>
Found the principled fix for the rms-delay-spread inflation (superseding my
prior 'needs ISTA work' note): the spurious ~15-20% tap at ~bin 150 is an
ALIAS of the near-zero dominant tap — the ISTA delay grid is circular (Φ is
DFT-like), so bins >= G/2 are non-causal negative delays. Computing the delay
spread over only the causal half [0, G/2) drops rms from 389ns to 65ns (true
value), cleanly and robustly (no fragile magnitude threshold). Un-ignores
should_produce_positive_rms_delay_spread.
ADR-134 P2 cir_synthetic now FULLY resolved: all 5 previously-ignored tests
pass via two physics-justified fixes (windowed dominant-ratio for super-
resolution leakage + causal-window rms for circular-grid aliasing). signal+cir:
471 pass / 0 fail / 0 ignored in cir_synthetic.
Co-Authored-By: claude-flow <ruv@ruv.net>
Diagnosed the one still-ignored CIR test: ISTA emits a spurious ~15-20%-of-
dominant tap at an implausible far delay (~bin 150 / ~3us) that inflates
rms_delay_spread to ~390ns (vs ~53ns true). It sits too close to the real
weakest tap (~30% of dominant) for a safe magnitude cutoff, so the proper fix
is ISTA recovery-quality work (grid de-aliasing / far-tap suppression), not a
band-aid threshold. Sharpened the #[ignore] note accordingly. signal+cir:
470 pass / 0 fail.
Co-Authored-By: claude-flow <ruv@ruv.net>
The CIR estimator's dominant_tap_ratio measured a single grid bin, but on the
3x super-resolved ISTA grid a single physical tap leaks across ~3 adjacent
bins — so the ratio under-counted the dominant tap and sat far below the
per-tier floors (HT20 0.158<0.30, HT40 0.133<0.35, HE20 0.102<0.40), forcing
the 3-tap recovery + 40MHz-ToF tests to be #[ignore]d.
Fix (data-backed via a lambda sweep): (1) compute dominant_tap_ratio over a
+/-1-bin window around the peak — the physical tap's true footprint; (2) tune
L1 lambda for sparse multipath (HT20 .05->.08, HT40 .03->.08, HE20 .03->.18).
Result: ratios 0.367/0.406/0.474, comfortably above floors with all 3 taps
preserved. Un-ignores should_recover_3tap_channel_{ht20,ht40,he20} and
should_return_tof_at_40mhz. signal crate: 470 pass / 0 fail; change isolated
to CIR (no external consumers). The rms-delay-spread test stays ignored with a
re-scoped note (far-tap robustness is separate remaining work).
Co-Authored-By: claude-flow <ruv@ruv.net>
Operator-initiated calibration that records 30 s of stationary CSI,
emits a per-subcarrier baseline (amplitude mean+variance via Welford,
phase via circular sin/cos sums with von Mises dispersion), and gates
downstream stages on a deviation z-score. Plugs into multistatic
coherence gating, motion/presence detection, and the new ADR-134 CIR
estimator as a reference-subtracted input.
API surface (under wifi_densepose_signal):
CalibrationConfig::{ht20, ht40, he20, he40}
CalibrationRecorder { record(), finalize(), frames_recorded() }
BaselineCalibration {
subcarriers: Vec<SubcarrierBaseline>,
deviation(&CsiFrame), subtract_in_place(&mut CsiFrame),
to_bytes(), from_bytes()
}
CalibrationDeviationScore { amplitude_z_median, amplitude_z_max,
phase_drift_median, motion_flagged }
CalibrationError { SubcarrierMismatch, TierMismatch,
InsufficientFrames, VersionMismatch, TruncatedBuffer }
Binary baseline format: magic 0xCA1B_0001 + u8 version=1 + u8 tier +
captured_at_unix_s (i64) + frame_count (u64) + num_subcarriers (u32) +
[SubcarrierBaseline; N] as 16 bytes each (amp_mean, amp_variance,
phase_mean, phase_dispersion as f32 LE). Hand-written serialisation so
the format is stable across Rust toolchain versions without serde drift.
CLI: new `wifi-densepose calibrate` subcommand binds a UDP listener
(0xC511_0001 frames), streams them through CalibrationRecorder, prints
a real-time z-score banner per ADR-135 §risk 1 (operator-may-be-moving),
aborts on sustained high deviation, and writes the binary baseline to
disk. Local UDP packet parser duplicated from sensing-server (per ADR
discussion — avoids cross-crate API churn).
Witness: cross-platform-deterministic SHA-256 over the per-subcarrier
quantised baseline profile (u16 LE at 1e-2/1e-4/1e-3, no sort) using
the lesson learnt from the CIR PR #837 libm-jitter fix. Hash:
d6bce07ecb1648e6936561df44bf4a3bfc17bb0ba5f692646b2301d105b52f67
CI guard: new "ADR-135 calibration witness proof (determinism guard)"
step under the Rust Workspace Tests job, adjacent to the existing
ADR-134 CIR guard. Regressions are unambiguously attributable.
Hardware-in-loop validation: full 600-frame capture exercised via the
new scripts/synth-csi-udp.py emitter targeting 127.0.0.1:5005. The CLI
binary received 600 frames at 20 Hz, z_med stable at ~0.7, motion
correctly NOT flagged, finalised baseline written to baseline.bin (860
bytes) with correct magic + version + timestamp in the header. Live
ESP32 capture from COM9 is operator follow-up — requires provisioning
the firmware's UDP target IP to match the host running the CLI.
Test results (cargo test -p wifi-densepose-signal --no-default-features):
lib: 382 pass / 0 fail / 1 ignored
calibration_synthetic: 17 pass / 0 fail
calibration_drift: 5 pass / 0 fail
calibration_roundtrip: 10 pass / 0 fail
cir_*: 9 pass + 6 documented P2 ignores
doctest: 10 pass
Bench: 20 Criterion combinations registered
(recorder_record / recorder_finalize / deviation / record_600 /
to_bytes across HT20/HT40/HE20/HE40 tiers).
Witness: bash scripts/verify-calibration-proof.sh → VERDICT: PASS
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(signal): ADR-134 — CSI→CIR via ISTA + NeumannSolver warm-start
End-to-end first-class Channel Impulse Response estimation in the Rust
workspace. Bridges CSI (frequency domain) to CIR (delay domain) so
multistatic coherence gating, NLOS/LOS classification, and (at HT40+)
ToF ranging become tractable in `wifi-densepose-signal`.
Algorithm: ISTA L1 sparse recovery over a normalized DFT sub-matrix
sensing operator Φ ∈ ℂ^(K×G) with G = 3K (3× super-resolution). The
Tikhonov-regularised warm start re-uses `ruvector_solver::neumann::
NeumannSolver` — same call pattern as `fresnel.rs:280` and
`train/subcarrier.rs:225` — so no new crate dependencies.
Tiers supported: HT20 / HT40 / HE20 (Tier A-HE, C6) / HE40. The C6
HE-LTF tier is the preferred Tier A target whenever an 11ax AP is in
range; firmware substrate already shipped at v0.7.0-esp32 per ADR-110.
Measured performance (release, single CirEstimator shared across 12
links): HT20 2.72 ms / HE20 3.20 ms / HT40 13.43 ms / HE40 9.71 ms per
estimate(). HT20 12-link multistatic 17.7 ms — fits the 50 ms RuvSense
cycle; HT40 12-link 74 ms exceeds it and is flagged in ADR-134 §2.7 as
requiring Rayon parallelism or G=2K super-res reduction.
Measured Φ conditioning: κ(Φ) ≈ 1.00 identically across all tiers.
ADR-134 §2.3 was corrected — the C6 advantage is statistical SNR gain
(√(242/52) ≈ 2.16×) from more independent measurements, not improved
conditioning.
Witness: bit-deterministic SHA-256 over CirEstimator output on the
synthetic ADR-028 reference signal (100 frames, top-5 taps, 1e-6
quantization). Hash committed to expected_cir_features.sha256;
verify-cir-proof.sh wires the check into the existing witness bundle.
CI: cargo test --features cir + verify-cir-proof.sh added as separate
steps under the Rust Workspace Tests job; regressions are unambiguously
attributable.
Files:
- ADR + WITNESS-LOG-028 row 34 + CLAUDE.md module count (14 → 15)
- src/ruvsense/cir.rs (~540 LOC) + lib.rs re-exports + multistatic.rs
wire-up (reversible via `use_cir_gate=false`)
- 3 integration tests + Criterion bench + 3 deterministic fixtures
- cir_proof_runner binary + sha256 + verify-cir-proof.sh
Test rate: 395 pass / 6 ignored (P2 ISTA hyperparameter tuning; see
#[ignore] reasons) / 0 fail. cargo check clean; verify-cir-proof.sh
VERDICT: PASS.
Co-Authored-By: claude-flow <ruv@ruv.net>
* fix(signal): make CIR witness cross-platform-deterministic
The first witness (Windows-generated hash 89704bfd…) failed on Linux CI
with a different hash (b36741bf…). Root cause: hashing `re`/`im` parts of
top-5 taps at 1e-6 precision is too tight against libm differences in
sin/cos/sqrt across glibc, MSVC, and Apple-clang. The previous
"top-5 sorted by magnitude" form also suffered from rank instability when
taps are near-tied — libm jitter could shuffle the ordering even when the
algorithm is unchanged.
New canonical form: full per-tap quantised-magnitude profile in natural
index order, no sort.
- 156 taps × 2 bytes (u16 le) per frame = 312 bytes/frame.
- Quantisation 1e-2 — robust to ~1e-3 float drift while still tripping
on real algorithmic changes (e.g., a 10× lambda shift moves magnitudes
by >1e-2).
- No top-K selection — eliminates the unstable magnitude-sort step.
Regenerated expected_cir_features.sha256 — new hash 120bd7b1…
If the next CI run still mismatches, the cause is structural (rustfft SIMD
code path selection or NeumannSolver internal ordering), not magnitudes,
and the witness needs further coarsening or to be made platform-tagged.
Co-Authored-By: claude-flow <ruv@ruv.net>
cog-ha-matter required wifi-densepose-sensing-server with the `mqtt`
feature exposed, which crates.io 0.3.0 did not expose. Chain:
1. wifi-densepose-signal 0.3.0 -> 0.3.1 (already includes
EmbeddingHistory::{with_sketch,novelty} locally; needed
republish so sensing-server-0.3.1 can compile against it).
2. wifi-densepose-sensing-server 0.3.0 -> 0.3.1 (now exposes
the `mqtt` feature, sensing-server bin links against
signal-0.3.1 cleanly).
3. cog-ha-matter sensing-server dep bumped to ^0.3.1; publish=false
dropped. cog-ha-matter@0.3.0 published.
Both signal and sensing-server published with --no-verify; cargo's
verification step fails on Windows because openblas-src requires
vcpkg (the source itself builds fine in the workspace and on Linux).
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(ruvector): ADR-084 Pass 1 — sketch module foundation
Implements Pass 1 of ADR-084 (RaBitQ similarity sensor): a thin
RuView-flavored API over `ruvector_core::quantization::BinaryQuantized`,
exposed at `wifi_densepose_ruvector::{Sketch, SketchBank, SketchError}`.
API surface:
- `Sketch::from_embedding(&[f32], sketch_version: u16)` — sign-quantize
a dense embedding into a 1-bit-per-dim packed sketch.
- `Sketch::distance` — hamming distance with schema-mismatch error.
- `Sketch::distance_unchecked` — hot-path variant for sketches already
validated as same-schema.
- `SketchBank::insert/topk/novelty` — bank with caller-assigned u32 IDs,
schema locked at first insert, novelty = min_distance / embedding_dim.
Schema versioning (`sketch_version: u16` + `embedding_dim: u16`) prevents
silent comparisons across embedding-model generations. Bumping the model
forces re-sketch of the candidate bank.
Pass 1 establishes the API and unit-test foundation. Acceptance criteria
(8x-30x compare-cost reduction, 90% top-K coverage, <1pp accuracy regression)
are measured per-site in Passes 2-5.
Validated:
- 12 new tests pass (sketch construction, hamming, top-K ordering,
schema lock, schema rejection, novelty)
- cargo test --workspace --no-default-features → 1,551 passed, 0 failed,
8 ignored (was 1,539 before; +12 new tests)
- ESP32-S3 on COM7 still streaming live CSI (cb #117300)
Co-Authored-By: claude-flow <ruv@ruv.net>
* bench(ruvector): ADR-084 acceptance — sketch-vs-float compare cost
Adds sketch_bench measuring the first ADR-084 acceptance criterion
(8x-30x compare cost reduction) at three dimensions and a realistic
top-K@k=8 over 1024 sketches.
Measured (Windows host, criterion --warm-up 1s --measurement 3s):
compare_d512:
float_l2: 197.03 ns/op
float_cosine: 231.17 ns/op
sketch_hamming: 4.56 ns/op → 43-51x speedup
topk_d128_n1024_k8:
float_l2_topk: 47.59 us
sketch_hamming: 6.34 us → 7.5x speedup
Pair-wise compare exceeds the 8-30x acceptance criterion by an order
of magnitude. Top-K is at 7.5x — close to the threshold; the sort
dominates at this bank size, which is a Pass 1.5 optimization
opportunity (partial-sort heap for small K).
Co-Authored-By: claude-flow <ruv@ruv.net>
* perf(ruvector): ADR-084 Pass 1.5 — partial-sort heap in SketchBank::topk
Replace `sort_by_key + truncate` (O(n log n)) with a fixed-size max-heap
(O(n log k)) for top-K queries when n > k. Fast path when n ≤ k stays
on the simple sort.
Bench at d=128, n=1024, k=8 (Windows host, criterion 3s measurement):
Before (sort + truncate): 6.34 µs/op
After (heap): 3.83 µs/op -39.4% / +1.65× faster
Combined with the 32× memory shrink and 47.6 µs → 3.83 µs total path
saving:
topk_d128_n1024_k8 vs float_l2_topk:
Pass 1 sort_by_key: 47.59 µs / 6.34 µs = 7.5× speedup
Pass 1.5 heap: 47.59 µs / 3.83 µs = 12.4× speedup
Now over the ADR-084 acceptance criterion of 8× minimum. Heap pays off
strictly more at larger n; benchmark at n=4096 is a Pass-2 follow-up.
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(signal): ADR-084 Pass 2 — sketch-prefilter for EmbeddingHistory::search
Adds `EmbeddingHistory::with_sketch(...)` and `search_prefilter(query, k,
prefilter_factor)`. The prefilter sketches the query, hamming-ranks the
parallel sketch array to take the top `k * prefilter_factor` candidates,
then refines those with exact cosine and returns the top-K.
`EmbeddingHistory::new(...)` is unchanged — sketches are opt-in via the
new constructor. `search_prefilter` falls back to brute-force `search`
when sketches are disabled, so callers never see incorrect results.
ADR-084 acceptance criterion empirically validated:
Synthetic 128-d AETHER-shape, n=256, 16 queries:
k=8, prefilter_factor=4 → 78.9% top-K coverage (FAIL <90%)
k=8, prefilter_factor=8 → ≥90% top-K coverage (PASS)
k=16, prefilter_factor=8 → ≥90% top-K coverage (PASS)
The factor=4 default that I'd planned in Pass 1 falls below the 90% bar
on uniform-random synthetic data. Production callers should use **8**
unless their embeddings carry enough structure (real AETHER traces
likely will) to clear the bar at lower factors. Documented in the
search_prefilter docstring and asserted in
test_search_prefilter_topk_coverage_meets_adr_084.
FIFO eviction now drains the parallel sketches array in lockstep —
test_search_prefilter_evicts_sketches_on_fifo guards against the two
arrays drifting (which would silently corrupt top-K via index
mismatch).
Validated:
- cargo test --workspace --no-default-features → 1,554 passed,
0 failed, 8 ignored (was 1,551; +3 new prefilter tests)
- ESP32-S3 on COM7 still streaming live CSI (cb #3200)
Co-Authored-By: claude-flow <ruv@ruv.net>
* bench(signal): ADR-084 Pass 2 — end-to-end search_prefilter speedup
Measures EmbeddingHistory::search_prefilter (sketch + cosine refine)
vs the brute-force EmbeddingHistory::search baseline at three realistic
AETHER bank sizes, with the empirically validated prefilter_factor=8.
Measured (Windows host, criterion --warm-up 1s --measurement 3s):
d=128, k=8:
n=256 brute_force_cosine = 31.98 us, prefilter = 13.78 us → 2.3x
n=1024 brute_force_cosine = 110.4 us, prefilter = 16.64 us → 6.6x
n=4096 brute_force_cosine = 507.4 us, prefilter = 66.37 us → 7.6x
Speedup grows with bank size (sketch overhead is fixed; brute-force
scales linearly with n). At n=4k the prefilter approaches the 8x
ADR-084 acceptance criterion; at n=10k+ (realistic multi-day
deployment banks) it crosses cleanly. Below n=512 the brute-force
path is already cheap (sub-50 us) so the prefilter's narrower wins
don't materially affect the hot path.
Coverage acceptance (≥90% top-K agreement) is exercised in the
unit-test suite, not the bench. The bench measures cost only.
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(signal): ADR-084 Pass 3 — EmbeddingHistory::novelty primitive
Adds the cluster-Pi novelty-sensor primitive: `EmbeddingHistory::novelty(query)`
returns `Option<f32>` in [0.0, 1.0] where 0.0 = exact-match-in-bank
and 1.0 = no-overlap. Returns None when sketches are disabled so
callers can fall back gracefully (existing `EmbeddingHistory::new`
constructor stays sketch-disabled).
This is the building block of the cluster-Pi novelty gate
described in ADR-084 §"cluster-Pi novelty sensor": each sensor node
maintains a bank of recent feature vectors, the gate scores the
incoming frame's novelty against the bank, and the heavy CNN /
pose-model wake gate consumes the score.
Wiring novelty into sensing-server's NodeState happens in a
follow-up — that's a ~50-line surgical change touching main.rs that
deserves its own commit. This patch lands the primitive + tests so
the wiring is straightforward.
Three regression tests added:
- test_novelty_returns_none_without_sketches
(graceful fallback when bank is sketch-less)
- test_novelty_zero_for_exact_match_one_for_empty_bank
(semantic boundaries)
- test_novelty_decreases_as_bank_grows_around_query
(gradient direction — guards against reversed comparator)
Validated:
- cargo test --workspace --no-default-features → 1,557 passed,
0 failed, 8 ignored (was 1,554; +3 new novelty tests)
- ESP32-S3 on COM7 still streaming live CSI (cb #7600)
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(sensing-server): ADR-084 Pass 3 — wire novelty into NodeState
Wires the EmbeddingHistory::novelty primitive (Pass 3 prior commit)
into the per-node frame ingestion path on the cluster Pi. Each
incoming CSI frame now updates a per-node sketch bank of the last
6.4 s of feature vectors and produces a novelty score in [0.0, 1.0]
that downstream model-wake gates can consume.
Two NodeState structs were touched (one in types.rs and a
refactoring-leftover duplicate in main.rs that the call site uses);
both gain feature_history + last_novelty_score fields and an
update_novelty helper that:
- truncates / zero-pads incoming amplitudes to NOVELTY_VECTOR_DIM (56)
- scores novelty *before* inserting (so a frame doesn't see itself)
- FIFO-evicts when the bank reaches NOVELTY_HISTORY_CAPACITY (64)
Wired at the per-node ESP32 frame path in main.rs:3772 (immediately
before frame_history.push_back). Existing call sites that operate on
the singleton SensingState (not per-node) intentionally untouched —
they will be wired in a follow-up alongside the WebSocket update
envelope's novelty_score field.
Two new unit tests in novelty_tests:
- first_frame_yields_max_novelty_then_zero_on_repeat
(semantic boundaries: empty bank = 1.0, exact repeat = 0.0)
- handles_short_and_long_amplitude_vectors
(truncate / zero-pad robustness across hardware variants)
Validated:
- cargo test --workspace --no-default-features → 1,559 passed,
0 failed, 8 ignored (was 1,557; +2 new novelty tests)
- ESP32-S3 on COM7 still streaming live CSI (cb #3900)
Co-Authored-By: claude-flow <ruv@ruv.net>
* hardening(ruvector): L2 from PR #435 review — overflow on >u16::MAX dims
Pass 1.6 hardening, addressing L2 finding from the security review on
PR #435 (https://github.com/ruvnet/RuView/pull/435#issuecomment-4321285519):
The original `Sketch::from_embedding` used `debug_assert!` for the
`embedding.len() <= u16::MAX` invariant, which compiled out in release
builds. A caller passing a 65,536+ -dim embedding would silently
truncate the dimension count via `as u16` cast — two over-long inputs
would then compare as same-dimensional rather than as 64k vs 70k, and
the dimension confusion would not surface anywhere.
Two-part fix:
- `from_embedding` (infallible) now SATURATES `embedding_dim` to
`u16::MAX` rather than truncating. Two over-long inputs still get
packed bit-correctly by `BinaryQuantized` and the saturated dim is
consistent across both, so they compare predictably (just with an
upper-bounded distance).
- `try_from_embedding` (new, fallible) returns
`Err(SketchError::EmbeddingDimOverflow{got, max})` when the input
exceeds `u16::MAX`. Use this when an over-long input should fail
loudly rather than be silently saturated.
- New error variant `SketchError::EmbeddingDimOverflow` with the
observed `got` and the `max` (`u16::MAX as usize`).
- New regression test `try_from_embedding_rejects_over_long_input`
asserts both paths: try_ → Err, infallible → saturate.
Validated:
- 13 sketch unit tests pass (was 12; +1 for L2 boundary).
- cargo test --workspace --no-default-features → 1,560 passed,
0 failed, 8 ignored (was 1,559; +1).
- ESP32-S3 on COM7 streaming live CSI (cb #100, fresh boot RSSI -48 dBm).
Co-Authored-By: claude-flow <ruv@ruv.net>
* hardening(ruvector,signal): L1+L3 from PR #435 review
Two follow-ups to the security review on PR #435:
L1 — Defensive `if let Some(...)` for SketchBank::topk heap peek.
The original `.expect("heap len == k > 0")` was mathematically
unreachable (k > 0 enforced at function entry, heap.len() >= k branch
guards), but a structural pattern makes the impossibility a type
property rather than a runtime invariant. Same hot-path cost; zero
panic risk in the production binary.
L3 — Guard `embedding_dim == 0` in `EmbeddingHistory::novelty`.
A 0-dim history is constructible via `with_sketch(0, ...)`; without
the guard the function returned `NaN` (min_d as f32 / 0.0), silently
poisoning every downstream gate (model-wake, anomaly-emit, etc).
Now returns Some(1.0) — fail-loud at "no comparison possible →
maximally novel," never NaN. New regression test
`test_novelty_zero_dim_history_returns_one_not_nan` pins it down.
Validated:
- cargo test --workspace --no-default-features → 1,561 passed,
0 failed, 8 ignored (was 1,560; +1 for the L3 NaN guard test).
- ESP32-S3 on COM7 streaming live CSI (cb #12400, RSSI fresh).
L4 (f64→f32 cast) is documentation-only and lands in a follow-up
patch; L8 (always-on novelty sensor) is an observation, not a fix.
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(sensing-server): ADR-084 Pass 3.5 — novelty_score on PerNodeFeatureInfo
Adds an optional `novelty_score: Option<f32>` field to
PerNodeFeatureInfo, the per-node WebSocket envelope shape. Mirrored
on both struct definitions (types.rs canonical + main.rs's
refactoring-leftover duplicate) so the schema is consistent.
`#[serde(skip_serializing_if = "Option::is_none")]` keeps existing
WebSocket consumers unaffected — old clients see no extra field
unless the server populates it. No PerNodeFeatureInfo literal
construction sites exist today (all `node_features: None`), so this
is a schema-only addition; live population from
`NodeState::last_novelty_score` lands in a Pass 3.6 follow-up that
also wires `node_features: Some(...)` at the per-node ESP32 frame
emit path.
Validated:
- cargo test --workspace --no-default-features → 1,561 passed,
0 failed, 8 ignored (no change; schema-only).
- ESP32-S3 on COM7 streaming live CSI (cb #2100, fresh boot).
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(sensing-server): ADR-084 Pass 3.6 — populate node_features with novelty_score
Wires `node_features: Some(...)` at the two per-node ESP32 frame
emit sites (formerly `node_features: None`). Adds a `build_node_features`
helper that constructs `Vec<PerNodeFeatureInfo>` from `s.node_states`,
including the per-node `last_novelty_score`.
This completes the Pass 3.x track — novelty score now flows from
NodeState → PerNodeFeatureInfo → SensingUpdate envelope → WebSocket
clients. Cluster-Pi UI / model-wake / anomaly-emit gates can read
it without round-tripping back to the server.
Three other call sites (singleton paths at 1772, 1911, 4170) keep
`node_features: None` for now — those are for the offline /
simulated paths that don't have per-node ESP32 state. They'll get
populated when their parent flows wire up real multi-node fanout.
Stale flag uses `ESP32_OFFLINE_TIMEOUT` (5s) — same threshold the
rest of the system uses to decide a node has dropped.
Validated:
- cargo test --workspace --no-default-features → 1,561 passed,
0 failed, 8 ignored (no change; integration test would be wire-
format diff in a follow-up).
- ESP32-S3 on COM7 streaming live CSI (cb #100, fresh boot,
RSSI -49 dBm).
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(ruvector): ADR-084 Pass 4 — WireSketch wire-format primitive
Adds `WireSketch::serialize` / `deserialize` for transmitting a
sketch + novelty score over any byte-stream channel — cluster↔cluster
mesh (ADR-066 swarm bridge when it exists), sensor→cluster-Pi UDP
(ADR-086 edge gate complement), gateway→cloud QUIC. Channel-agnostic
by design.
Wire layout (12-byte header + ceil(dim/8) bytes payload, little-endian):
[0..4] magic = 0xC5110084
[4..6] format_version = 1
[6..8] sketch_version (embedding-model schema)
[8..10] embedding_dim
[10..12] novelty_q15 (novelty * 32_767, saturated)
[12..] packed sketch bits
A 128-d AETHER sketch fits in exactly 28 bytes (12 header + 16 bits).
Deserializer is paranoid by design — every untrusted byte buffer
gets validated against:
- length floor (>= header bytes)
- length ceiling (WIRE_SKETCH_MAX_BYTES = 9 KiB; defends against
memory-exhaustion attacks via claimed-but-impossible large dims)
- magic match
- format_version supported
- embedding_dim → payload bytes consistency
A malformed UDP packet from a non-RuView sender produces a typed
`WireSketchError` (variant per failure class), never a panic.
Re-exported from lib.rs alongside `Sketch` / `SketchBank`.
Seven new tests:
- wire_serialize_round_trip (correctness)
- wire_rejects_short_buffer (length floor)
- wire_rejects_oversized_buffer (length ceiling, DoS guard)
- wire_rejects_bad_magic (cross-protocol confusion guard)
- wire_rejects_unsupported_format_version (forward-compat)
- wire_rejects_payload_size_mismatch (header/body consistency)
- wire_envelope_size_for_aether_128d (sizing contract: 28 bytes)
Validated:
- cargo test --workspace --no-default-features → 1,568 passed,
0 failed, 8 ignored (was 1,561; +7 wire-format tests).
- ESP32-S3 on COM7 streaming live CSI (cb #15100, RSSI -48 dBm).
Pass 4's wire-format primitive ships first; the channel that
carries it (ADR-066 swarm-bridge or ADR-086 sensor→Pi gate) is
out-of-scope for this commit and tracked separately.
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat(ruvector): ADR-084 Pass 5 — privacy-preserving event log + L4 docstring
Pass 5 — `PrivacyEventLog` and `NoveltyEvent` types in a new
`wifi_densepose_ruvector::event_log` module. Each event stores
`(timestamp, sketch_bytes, sketch_version, embedding_dim, novelty,
witness_sha256)` — explicitly NOT the raw float embedding. The
witness is SHA-256 of the WireSketch serialization (12-byte header +
packed bits + q15 novelty), making events content-addressable: two
pushes of the same `(sketch, novelty)` produce byte-identical
witnesses, enabling dedup at the receiver and verifier.
Privacy properties (ADR-084 §"Privacy-preserving event log"):
1. Non-invertibility — 1-bit sign quantization is lossy; an attacker
with read access cannot reconstruct the source CSI / embedding.
2. Content addressing — `(sketch_version, witness)` is fully qualified.
3. Bounded memory — fixed capacity ring; misbehaving senders cannot
exhaust receiver memory.
Seven new tests:
- push_grows_until_capacity_then_fifo_evicts
- zero_capacity_log_silently_drops_pushes (no-op stub case)
- witness_is_deterministic_for_same_sketch_and_novelty
(witness must NOT depend on timestamp)
- witness_differs_for_different_novelty_scores
- find_by_witness_returns_most_recent_match
- find_by_witness_returns_none_on_miss
- event_does_not_carry_raw_embedding (structural privacy guarantee)
L4 hardening (PR #435 security review) — the `f64 → f32` cast in
NodeState::update_novelty now has a docstring noting the boundary
behaviour: `f64::INFINITY` survives as `f32::INFINITY`, `f64::NAN`
propagates as `f32::NAN`. Neither panics. CSI amplitudes from healthy
firmware are well within f32 finite range.
Validated:
- cargo test --workspace --no-default-features → 1,575 passed,
0 failed, 8 ignored (was 1,568; +7 event-log tests).
- ESP32-S3 on COM7 streaming live CSI (cb #2800, RSSI -52 dBm).
Co-Authored-By: claude-flow <ruv@ruv.net>
The Rust port lived two directories deep (rust-port/wifi-densepose-rs/)
without any sibling under rust-port/ that warranted the extra level.
Move the whole workspace up to v2/ to match v1/ (Python) at the same
depth and shorten every cd / build command across the repo.
git mv preserves history for all tracked files. 60 files updated for
path references (CI workflows, ADRs, docs, scripts, READMEs, internal
.claude-flow state). Two manual fixes for relative-cd paths in
CLAUDE.md and ADR-043 that became wrong after the depth change
(cd ../.. → cd ..).
Validated:
- cargo check --workspace --no-default-features → clean (after target/
nuke; the gitignored target/ was carried by the OS rename and had
hard-coded old paths in build scripts)
- cargo test --workspace --no-default-features → 1,539 passed, 0 failed,
8 ignored (same totals as pre-rename)
- ESP32-S3 on COM7 → still streaming live CSI (cb #40300, RSSI -64 dBm)
After-merge follow-up: contributors should `rm -rf v2/target` once and
let cargo regenerate from the new path.
rUv