* fix(firmware): gate phantom persons + add presence hysteresis (#998, #996)
Two ESP32 edge-vitals logic bugs in edge_processing.c. Both are
robustness/logic fixes — NOT validated-accuracy claims. True count/PCK
vs labelled ground truth remains hardware/data-gated (COM9 ESP32-S3).
#998 — n_persons over-counted (reported 4 for one person):
update_multi_person_vitals() split top-K subcarriers into top_k_count/2
groups and marked EVERY group active, so one body's multipath always
read the full EDGE_MAX_PERSONS. Added two pure, host-testable helpers:
- count_distinct_persons(): per-group energy gate
(EDGE_PERSON_MIN_ENERGY_RATIO) + spatial dedup
(EDGE_PERSON_MIN_SC_SEP) so weak/adjacent multipath groups don't
count as separate bodies. Strongest group always counts (>=1).
- person_count_debounce(): a gated count must hold
EDGE_PERSON_PERSIST_FRAMES consecutive frames before it's emitted,
so a single noisy frame can't promote a phantom.
The active flags now mark only the strongest stable_count groups.
#996 — presence flag flickered at ~50cm despite high presence_score:
the bare `score > threshold` compare chattered on a noisy score
(field-observed 2.6-26.7 frame-to-frame). Replaced with a Schmitt
trigger + clear-debounce (presence_flag_update): assert above
threshold, hold in the dead band down to threshold *
EDGE_PRESENCE_HYST_RATIO, clear only after EDGE_PRESENCE_CLEAR_FRAMES
consecutive sub-low frames. presence_score itself is unchanged and
still emitted for consumer-side thresholding.
All thresholds are named, documented constants in edge_processing.h.
Firmware builds clean for esp32s3 (idf.py build RC=0).
Co-Authored-By: claude-flow <ruv@ruv.net>
* test(firmware): host C99 tests for vitals count + presence logic (#998, #996)
test/test_vitals_count_presence.c pins the two fixes with deterministic
host-buildable tests (no ESP-IDF needed). 13 cases / 22 assertions, all
passing under gcc 13 -Wall -Wextra:
#998 count gate: single strong signature + multipath -> count==1;
two well-separated -> 2; two strong-but-adjacent -> 1 (dedup);
no signal -> 0; three well-separated -> 3.
#998 debounce: transient spike rejected; sustained change accepted;
flapping count stays stable.
#996 presence: dithering trace -> stable flag (no flicker); brief dips
held by clear-debounce; genuine departure clears within hold window;
dead-band holds state.
The named tuning constants are #include'd from the real
edge_processing.h so the test and firmware can never disagree on
thresholds. `make run_vitals` / `make host_tests` added; binaries
gitignored.
Hardware-gated caveat documented in the test header: these pin the
decision LOGIC; the exact energy/separation/hysteresis values that best
match a real room vs labelled occupancy remain on-device tuning.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs: record ESP32 vitals count/presence fixes (#998, #996)
CHANGELOG [Unreleased] Fixed: root cause + fix + named constants + test
+ explicit hardware/data-gated caveat for both bugs.
ADR-021 Implementation Notes: dated 2026-06 entry noting the edge-path
person-count + presence-flicker fixes are boolean/count emission-logic
fixes, not a validated-accuracy claim; thresholds pending on-device
calibration.
Co-Authored-By: claude-flow <ruv@ruv.net>
* fix(sensing-server): emit real field-derived person position/motion to /ws/sensing (#1050)
The Observatory 3D figure never animated because the sensing_update WS
frame carried no per-person position/motion_score/pose — only image-space
keypoints. The FigurePool/PoseSystem (and demo-data.js's own contract)
animate each figure from persons[i].position (room-world), .motion_score
(0..100), and .pose; none were on the live stream.
Honest scope (Case 2): the pipeline has no calibrated per-person room
localizer or per-person skeletal pose. New field_localize module extracts
the strongest peak(s) from the real signal_field grid (subcarrier
variances x motion-band power) and maps the peak cell to Observatory world
coords with the exact _buildSignalField transform. motion_score is the
measured motion_band_power passed through; pose is set only from a real
aggregate posture estimate, else None (never a fabricated skeleton).
Empty/below-threshold field -> persons: [] (no phantom); present person
with no resolvable peak keeps position [0,0,0], not invented coords.
attach_field_positions runs after the tracker step at all five broadcast
sites. New position/motion_score/pose fields added to both PersonDetection
structs. No UI change needed — the Observatory already reads these fields.
Tests: field_localize peak/coordinate/empty/separation units +
observatory_persons_field_position_tests (known-peak -> emitted position,
empty-room -> no phantom, pose real-or-None, below-threshold honesty).
sensing-server bin 441->451, 0 failed.
Co-Authored-By: claude-flow <ruv@ruv.net>
* docs(changelog): record #1050 Observatory persons position/motion fix
Co-Authored-By: claude-flow <ruv@ruv.net>
The MM-Fi benchmark environment archives (E01-E04.zip) are large data
files fetched separately for evaluation — they must never be committed.
Also keeps the existing aether-arena/staging/ private-staging exclusion.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Add wifi-densepose-pointcloud: real-time dense point cloud from camera + WiFi CSI
New crate with 5 modules:
- depth: monocular depth estimation + 3D backprojection (ONNX-ready, synthetic fallback)
- pointcloud: Point3D/ColorPoint types, PLY export, Gaussian splat conversion
- fusion: WiFi occupancy volume → point cloud + multi-modal voxel fusion
- stream: HTTP + Three.js viewer server (Axum, port 9880)
- main: CLI with serve/capture/demo subcommands
Demo output: 271 WiFi points + 19,200 depth points → 4,886 fused → 1,718 Gaussian splats.
Serves interactive 3D viewer at http://localhost:9880 with Three.js orbit controls.
ADR-SYS-0021 documents the architecture for camera + WiFi CSI dense point cloud pipeline.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Optimize pointcloud: larger splat voxels, smaller responses, faster fusion
- Gaussian splat voxel size: 0.10 → 0.15 (42% fewer splats: 1718 → 994)
- Splat response: 399 KB → 225 KB (44% smaller)
- Pipeline: 22.2ms mean (100 runs, σ=0.3ms)
- Cloud API: 1.11ms avg, 905 req/s
- Splats API: 1.39ms avg, 719 req/s
- Binary: 1.0 MB arm64 (Mac Mini), tested
Co-Authored-By: claude-flow <ruv@ruv.net>
* Complete implementation: camera capture, WiFi CSI receiver, training pipeline
Three new modules added to wifi-densepose-pointcloud:
1. camera.rs — Cross-platform camera capture
- macOS: AVFoundation via Swift, ffmpeg avfoundation
- Linux: V4L2, ffmpeg v4l2
- Camera detection, listing, frame capture to RGB
- Graceful fallback to synthetic data when no camera
2. csi.rs — WiFi CSI receiver for ESP32 nodes
- UDP listener for CSI JSON frames from ESP32
- Per-link attenuation tracking with EMA smoothing
- Simplified RF tomography (backprojection to occupancy grid)
- Test frame sender for development without hardware
- Ready for real ESP32 CSI data from ruvzen
3. training.rs — Calibration and training pipeline
- Depth calibration: grid search over scale/offset/gamma
- Occupancy training: threshold optimization for presence detection
- Ground truth reference points for depth RMSE measurement
- Preference pair export (JSONL) for DPO training on ruOS brain
- Brain integration: submit observations as memories
- Persistent calibration files (JSON)
New CLI commands:
ruview-pointcloud cameras # list available cameras
ruview-pointcloud train # run calibration + training
ruview-pointcloud csi-test # send test CSI frames
ruview-pointcloud serve --csi # serve with live CSI input
All tested: demo, training (10 samples, 4 reference points, 3 pairs),
CSI receiver (50 test frames), server API.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Fix viewer: replace WebSocket with fetch polling
Co-Authored-By: claude-flow <ruv@ruv.net>
* Wire live camera into server — real-time updating point cloud
- Server captures from /dev/video0 at 2fps via ffmpeg
- Background tokio task refreshes cloud + splats every 500ms
- Viewer polls /api/splats every 500ms, only updates on new frame
- Shows 🟢 LIVE / 🔴 DEMO indicator
- Camera position set for first-person view (looking forward into scene)
- Downsample 4x for performance (19,200 points per frame)
- Graceful fallback to demo data if camera capture fails
Co-Authored-By: claude-flow <ruv@ruv.net>
* Add MiDaS GPU depth, serial CSI reader, full sensor fusion
- MiDaS depth server: PyTorch on CUDA, real monocular depth estimation
- Rust server calls MiDaS via HTTP for neural depth (falls back to luminance)
- Serial CSI reader for ESP32 with motion detection + presence estimation
- CSI disabled by default (RUVIEW_CSI=1 to enable) — serial reader needs baud config
- Edge-enhanced depth for better object boundaries
- All sensors wired: camera, ESP32 CSI, mmWave (CSI gated until serial fixed)
Co-Authored-By: claude-flow <ruv@ruv.net>
* Complete 7-component sensor fusion pipeline (all working)
1. ADR-018 binary parser — decodes ESP32 CSI UDP frames, extracts I/Q subcarriers
2. WiFlow pose — 17 COCO keypoints from CSI (186K param model loaded)
3. Camera depth — MiDaS on CUDA + luminance fallback
4. Sensor fusion — camera depth + CSI occupancy grid + skeleton overlay
5. RF tomography — ISTA-inspired backprojection from per-node RSSI
6. Vital signs — breathing rate from CSI phase analysis
7. Motion-adaptive — skip expensive depth when CSI shows no motion
Live results: 510 CSI frames/session, 17 keypoints, 26% motion, 40 BPM breathing.
Both ESP32 nodes provisioned to send CSI to 192.168.1.123:3333.
Magic number fix: supports both 0xC5110001 (v1) and 0xC5110006 (v6) frames.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Add brain bridge — sparse spatial observation sync every 60s
Stores room scan summaries, motion events, and vital signs
in the ruOS brain as memories. Only syncs every 120 frames
(~60 seconds) to keep the brain sparse and optimized.
Categories: spatial-observation, spatial-motion, spatial-vitals.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Update README + user guide with dense point cloud features
Added pointcloud section to README (quick start, CLI, performance).
Added comprehensive user guide section: setup, sensors, commands,
pipeline components, API endpoints, training, output formats,
deep room scan, ESP32 provisioning.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Add ruview-geo: geospatial satellite integration (11 modules, 8/8 tests)
New crate with free satellite imagery, terrain, OSM, weather, and brain integration.
Modules: types, coord, locate, cache, tiles, terrain, osm, register, fuse, brain, temporal
Tests: 8 passed (haversine, ENU roundtrip, tiles, HGT parse, registration)
Validation: real data — 43.49N 79.71W, 4 Sentinel-2 tiles, 2°C weather, brain stored
Data sources (all free, no API keys):
- EOX Sentinel-2 cloudless (10m satellite tiles)
- SRTM GL1 (30m elevation)
- Overpass API (OSM buildings/roads)
- ip-api.com (geolocation)
- Open Meteo (weather)
ADR-044 documents architecture decisions.
README.md in crate subdirectory.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Update ADR-044: add Common Crawl WET, NASA FIRMS, OpenAQ, Overture Maps sources
Extended geospatial data sources leveraging ruvector's existing web_ingest
and Common Crawl support for hyperlocal context.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Fix OSM/SRTM queries, add change detection + night mode
- OSM: use inclusive building filter with relation query and 25s timeout
- SRTM: switch to NASA public mirror with viewfinderpanoramas fallback
- Add detect_tile_changes() for pixel-diff satellite change detection
- Add is_night() solar-declination model for CSI-only night mode
- 6 new unit tests (night mode + tile change detection)
Co-Authored-By: claude-flow <ruv@ruv.net>
* Enhance viewer: skeleton overlay, weather, buildings, better camera
Add COCO skeleton rendering with yellow keypoint spheres and white bone
lines, info panel sections for weather/buildings/CSI rate/confidence,
overhead camera at (0,2,-4), and denser point size with sizeAttenuation.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Add CSI fingerprint DB + night mode detection
Co-Authored-By: claude-flow <ruv@ruv.net>
* Fix ADR-044 numbering conflict, update geo README
Renumbered provisioning tool ADR from 044 to 050 to avoid conflict
with geospatial satellite integration ADR-044.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Clean up warnings: suppress dead_code for conditional pipeline modules
Removes unused imports/variables via cargo fix and adds #[allow(dead_code)]
for modules used conditionally at runtime (CSI, depth, fusion, serial).
Pointcloud: 28 → 0 warnings. Geo: 2 → 0 warnings. 8/8 tests pass.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Fix PR #405 blockers: async runtime panic, crate rename, path traversal, brain URL config
- brain_bridge.rs: replace `Handle::current().block_on(...)` inside async fn
with `.await` (was a guaranteed "runtime within runtime" panic). Brain URL
now read from RUVIEW_BRAIN_URL env var (default http://127.0.0.1:9876),
logged once via OnceLock.
- wifi-densepose-geo: rename Cargo package from `ruview-geo` to
`wifi-densepose-geo` to match directory and workspace conventions. Update
all use sites (tests/examples/README). Same env-var pattern for brain URL
in brain.rs + temporal.rs.
- training.rs: add sanitize_data_path() rejecting `..` components and
safe_join() that canonicalises + enforces base-dir containment on every
write (calibration.json, samples.json, preference_pairs.jsonl,
occupancy_calibration.json). Defence-in-depth check also in main.rs
before TrainingSession::new.
- osm.rs: clamp Overpass radius to MAX_RADIUS_M=5000m; return Err beyond
that. Add parse_overpass_json() that rejects malformed payloads
(missing top-level `elements` array).
Co-Authored-By: claude-flow <ruv@ruv.net>
* csi_pipeline: rename WiFlow stub to heuristic_pose_from_amplitude, decouple UDP
Blocker 3 (PR #405 review): The "WiFlow inference" path was a stub that
built a model from empty weight vectors and synthesised keypoints from
amplitude energy. Presenting this as "WiFlow inference" was misleading.
- Rename WiFlowModel to PoseModelMetadata (empty tag struct; we only care
if the on-disk file exists)
- Rename load_wiflow_model() -> detect_pose_model_metadata() and log
"amplitude-energy heuristic enabled/disabled" (no "WiFlow" claim)
- Rename estimate_pose() -> heuristic_pose_from_amplitude() with
prominent `STUB:` doc comment saying this is NOT a trained model
Blocker 4 (PR #405 review): The UDP receiver held the shared Arc<Mutex>
across a synchronous process_frame() call, starving HTTP handlers.
- Introduce a std::sync::mpsc channel between the UDP thread (which only
parses + pushes) and a dedicated processor thread (which locks only
briefly around a single process_frame). HTTP snapshots via
get_pipeline_output no longer contend with the socket read loop.
Also:
- Move ADR-018 parser to parser.rs (see next commit); csi_pipeline re-exports
- send_test_frames now uses parser::build_test_frame for synthetic frames
- Log a one-line node stats summary every 500 frames (reads every public
CsiFrame field on the runtime path)
Co-Authored-By: claude-flow <ruv@ruv.net>
* Extract ADR-018 parser into parser.rs + wire Fingerprint CLI
File-split (strong concern #9 in PR #405 review): csi_pipeline.rs was 602
LOC; extract the pure-function ADR-018 parser + synthetic frame builder
into src/parser.rs. Inline unit tests in parser.rs cover:
- 0xC5110001 (raw CSI, v1) roundtrip
- 0xC5110006 (feature state, v6) roundtrip
- wrong magic is rejected
- truncated header is rejected
- truncated payload is rejected
main.rs: expose `fingerprint NAME [--seconds N]` subcommand wiring
record_fingerprint() (this was the only caller needed to make the public
API non-dead on the runtime path). Also:
- Replace `--host/--port` + external `--csi` with a single `--bind`
defaulting to loopback (`127.0.0.1:9880`) — addresses strong concern
#7 about exposing camera/CSI/vitals by default.
- Update synthetic `csi-test` to target UDP 3333 (matching the ADR-018
listener) and use the shared parser::build_test_frame.
- Defence-in-depth: call training::sanitize_data_path on the expanded
--data-dir before TrainingSession::new does the same.
Co-Authored-By: claude-flow <ruv@ruv.net>
* stream: extract viewer HTML to viewer.html, default bind to loopback
Strong concern #7 (PR #405): default HTTP bind leaked camera/CSI/vitals
to the LAN. The `serve` fn now takes a single `bind` arg and prints a
loud WARNING when bound outside loopback.
Strong concern #10 (PR #405): embedded HTML+JS was ~220 LOC of the 418
LOC stream.rs. Moved the markup verbatim into viewer.html and inlined
via `include_str!("viewer.html")`. Also:
- Drop the #![allow(dead_code)] crate-level silencing (reviewer point
#11). Remove the now-unused AppState.csi_pipeline field.
- capture_camera_cloud_with_luminance returns the mean luminance of the
captured frame; the background loop feeds that to
CsiPipelineState::set_light_level so the night-mode flag actually
toggles at runtime (previously it could only be set from tests).
Net effect on file size: stream.rs 418 → 232 LOC.
Co-Authored-By: claude-flow <ruv@ruv.net>
* Dead-code cleanup + tests for fusion/depth/OSM/training/fingerprinting
Reviewer point #11 (PR #405): remove the `#![allow(dead_code)]`
silencing added in 8eb808d and fix the underlying issues.
- Delete csi.rs: duplicate of csi_pipeline.rs with incompatible wire
format (JSON vs ADR-018 binary). csi_pipeline is the real path.
- Delete serial_csi.rs: never referenced by any module.
- Drop Frame.timestamp_ms (unread), AppState.csi_pipeline (unread),
brain_bridge::brain_available (caller-less), fusion::fetch_wifi_occupancy
(caller-less) — these had no runtime users.
- Drop crate-level #![allow(dead_code)] from camera.rs, depth.rs,
fusion.rs, pointcloud.rs.
Tests (target: 8-12, actual: 15 unit + 9 geo unit + 8 geo integration
= 32 total, all pass):
- parser.rs: 5 tests (v1/v6 magic roundtrip, wrong magic, truncated
header, truncated payload).
- fusion.rs: 2 tests (non-overlapping merge, voxel dedup).
- depth.rs: 2 tests (2x2 backproject → 4 points at z=1, NaN rejected).
- training.rs: 4 tests (rejects `..`, accepts relative child, refuses
TrainingSession::new("../etc/passwd"), accepts a clean tmpdir).
- csi_pipeline.rs: 2 tests (set_light_level toggles is_dark,
record_fingerprint stores and self-identifies).
- osm.rs: 3 tests (parse_overpass_json minimal fixture, rejects
malformed payload, fetch_buildings rejects > MAX_RADIUS_M).
Co-Authored-By: claude-flow <ruv@ruv.net>
* Update README + user-guide for PR #405 review-fix additions
- serve now uses --bind 127.0.0.1:9880 (loopback default) instead of --port
- Add fingerprint subcommand to CLI tables
- Document RUVIEW_BRAIN_URL env var + --brain flag
- Flag pose path as amplitude-energy heuristic stub (not trained WiFlow)
- Security note on exposing server outside loopback
- Add wifi-densepose-pointcloud + wifi-densepose-geo rows to crate table
Co-Authored-By: claude-flow <ruv@ruv.net>
Remove from index: daemon.pid, vectors.db, memory.db,
pending-insights.jsonl, session state, node_modules.
These are machine-specific runtime artifacts that should
never have been committed.
Co-Authored-By: claude-flow <ruv@ruv.net>
* feat: add MAC address filter for ESP32 CSI collection
In multi-AP environments, CSI frames from different access points get
mixed together, corrupting the sensing signal. Add transmitter MAC
filtering so only frames from a specified AP are processed.
Implementation:
- csi_collector: filter in wifi_csi_callback by comparing info->mac
against configured MAC; log transmitter MAC in periodic debug output
- csi_collector_set_filter_mac(): runtime API to enable/disable filter
- Kconfig: CSI_FILTER_MAC option (format "AA:BB:CC:DD:EE:FF")
- NVS: "filter_mac" 6-byte blob overrides Kconfig at runtime
- nvs_config: parse Kconfig MAC string at boot, load NVS override
- main: apply filter from config after csi_collector_init()
When no filter is configured (default), behavior is unchanged —
all transmitter MACs are accepted for backward compatibility.
Fixes#98
Co-Authored-By: claude-flow <ruv@ruv.net>
* chore: add CLAUDE.local.md to .gitignore
Local machine configuration (ESP-IDF paths, COM port, build
instructions) should not be committed to the repository.
Co-Authored-By: claude-flow <ruv@ruv.net>
- Add MacosCoreWlanScanner (macOS): CoreWLAN Swift helper adapter with
synthetic BSSID generation via FNV-1a hash for redacted MACs (ADR-025)
- Add LinuxIwScanner (Linux): parses `iw dev <iface> scan` output with
freq-to-channel conversion and BSS stanza parsing
- Both adapters produce Vec<BssidObservation> compatible with the
existing WindowsWifiPipeline 8-stage processing
- Platform-gate modules with #[cfg(target_os)] so each adapter only
compiles on its target OS
- Fix Python MacosWifiCollector: remove synthetic byte counters that
produced misleading tx_bytes/rx_bytes data (set to 0)
- Add compiled Swift binary (mac_wifi) to .gitignore
Co-Authored-By: claude-flow <ruv@ruv.net>
- Implemented the WiFi DensePose model in PyTorch, including CSI phase processing, modality translation, and DensePose prediction heads.
- Added a comprehensive training utility for the model, including loss functions and training steps.
- Created a CSV file to document hardware specifications, architecture details, training parameters, performance metrics, and advantages of the model.
rUv
Chaitanya Tata
Claude